Port forwarding internet camera viewing using NVR with POE ports

mycoma

mycoma

BIT Beta Team
Jun 11, 2014
150
51
Hello, I have a HIKvision DS-7604 SE/P, 4 built in poe ports. How do I setup port forwarding for remote viewing of the hik 2032 cams?? do I just forward the ip address of the cameras on 192.168.254 network to open 3 ports, even though the network that the nvr is on is 192.168.1.100? I see the cams have a secondary ip range 192.168.254.2 - .5
Thanks for any help!!!!
 
You must have installed on the NVR the firmware 2.3.9 and make sure that at the web interface of the NVR at the Advanced Options the feature Virtual host is checked i.e. enabled. In this way any http call to the address of the NVR LAN IP and at the port ofthe camera is forwarded through the NVR to the IP of the camera.

Read my post in his thread http://www.ipcamtalk.com/showthread...I-SE(P)-USA-Firmware-v2-3-9-(07-04-2014)-Beta
 
You must log in or register to reply here.
Top Bottom