Any of you guys recommend a Poe+ injector for Hik Ptz cams like the DS-2DE4225IW-DE? Several clients want a ptz added to their setup and using an injector would be easier and hopefully cheaper than a new switch. I’ve seen a few but they were more expensive than a switch.
POE+ Injectors
- Thread starter Defcon
- Start date
We haven't had any issues with these (30W max):
Tenda PoE30G-AT PoE Injector delivers up to 30W output power per port-Tenda-All For Better NetWorking
The DS-2DE4225IW-DE has a power consumption Max.: 18 W (Max. 7 W for IR) according to the specs.
Cost around 20 quid.
Tenda PoE30G-AT PoE Injector delivers up to 30W output power per port-Tenda-All For Better NetWorking
The DS-2DE4225IW-DE has a power consumption Max.: 18 W (Max. 7 W for IR) according to the specs.
Cost around 20 quid.
The Tenda is the actual injector I had spotted during my research. Price wise it couldn’t be beat as others I found were the price of a Poe+ router. Glad to hear you are using them without problems.
If I am not mistaken, a Hikvision injector costs a fortune and you could get 3 Tenda injectors for one Hikvision when I priced it. Could be mistaken though.
So for future reference for anyone, I can verify that a Trendnet TPE-115GI works fine with a DS-2DE4220IW, and presumably any camera that requires up to 30w of POE power.
I also have a Trendnet TPE-117GI and a Planet POE 172 which work fine with a DS-2DE5425IW and DS-2DE7225IW, and presumably other cameras which require Hi-POE and up to 60w of POE power.
I also have a Trendnet TPE-117GI and a Planet POE 172 which work fine with a DS-2DE5425IW and DS-2DE7225IW, and presumably other cameras which require Hi-POE and up to 60w of POE power.
