Hello,
I have a LTS camera system consisting of:
1 x NVR LTN8704-P4
www.ltsecurityinc.com
2 x Cameras CMIP7342W-28M Platinum Network Vandal Dome IP Camera 4MP - 2.8mm - IP Cameras
1 x Doorbell Hikvision DS-HD1
us.hikvision.com
I want to use the built in motion detection to trigger a Z-Wave sensor, something like a Z-Wave relay or relay to dry contact sensor.
I think I need a new NVR as my current one doesn't have any alarm output connections that I can tell.
Are there any NVRs that have this external alarm triggering ability?
Is there an easier way to go from camera motion detection to a Z-Wave network?
Thanks!
Sent from my Pixel 6 Pro using Tapatalk
I have a LTS camera system consisting of:
1 x NVR LTN8704-P4
Platinum 4-Channel Professional Level NVR
4-Channel 1080p NVR, Third-party network cameras supported, Up to 6 MP resolution recording, HDMI and VGA output at up to 1920 x 1080 resolution, 4 channels of simultaneous playback, HDD quota and group management, 4 independent PoE network interfaces
www.ltsecurityinc.com
2 x Cameras CMIP7342W-28M Platinum Network Vandal Dome IP Camera 4MP - 2.8mm - IP Cameras
1 x Doorbell Hikvision DS-HD1
3 MP Outdoor Wi-Fi Smart Doorbell Camera
Hikvision’s DS-HD1 Smart Doorbell Camera combines convenient access control features, such as PIR motion detection with a customizable detection area, infrared night-vision, Wi-Fi connectivity, and the ability to access on-demand streaming video and listen to two-way audio via a mobile application.
us.hikvision.com
I want to use the built in motion detection to trigger a Z-Wave sensor, something like a Z-Wave relay or relay to dry contact sensor.
I think I need a new NVR as my current one doesn't have any alarm output connections that I can tell.
Are there any NVRs that have this external alarm triggering ability?
Is there an easier way to go from camera motion detection to a Z-Wave network?
Thanks!
Sent from my Pixel 6 Pro using Tapatalk
Last edited: