hello ,we just upgarde out internet last week and since than out cameras not working we have poe switch and all cmarea connected from switches there is one wire came from switch which is inside in the nvr and only one camera woring i m sure thtas the wire came in from switch nody touch the switch.today i s missed around and the blue wire i try in modam and there was an other wire i try in nvr so i see an other camera than switch the cable to other port so i see one more camera but still not showing all the cmaera on same time
NVR poe switch camera are offline
- Thread starter asifali418
- Start date
If the cmaeras are powered by a POE switch and are NOT plugged into the POE ports of a POE NVR, then it's likely that since this happened with your "Internet upgrade" that your LAN IP is on a different subnet from before and none of the cameras are configured in the NVR with the new subnet.
Connect a PC to the "upgraded Internet", wireless is OK and press Windows key and "R" same time.
In the window that comes up type "cmd" and hit <enter>.
In the black command window type "ipconfig" and hit <enter>.
What is the IP address given for "default gateway" ?
If you have a monitor attached to the NVR for viewing, open up the camera configuration page and tell us the IP address of any offline camera.
What is the IP address of the one camera that you said IS working?
Connect a PC to the "upgraded Internet", wireless is OK and press Windows key and "R" same time.
In the window that comes up type "cmd" and hit <enter>.
In the black command window type "ipconfig" and hit <enter>.
What is the IP address given for "default gateway" ?
If you have a monitor attached to the NVR for viewing, open up the camera configuration page and tell us the IP address of any offline camera.
What is the IP address of the one camera that you said IS working?