NVR 7616NI-SE/P Telecamera DS-2CD2032-I

F

fantastico3

n3wb
Mar 1, 2015
1
0
Hello guys.
Sorry for the translation is not perfect.
I have a configuration problem with the NVR and cameras.
I have a NVR 7616NI-SE / P (16ch 8 port POE) and 12 cameras mod. DS-2CD2032-I.
7 cameras are connected directly to the NVR via POE ports and n. 4 via a switch connected to the port POE n. 8 NVR.
Unfortunately I can only see 8 cameras while others do not.
The NVR has 16 channels but it only shows 8 cameras?
This happens either via web browser either when the NVR is connected directly to the monitor.
How must configure the NVR and telecare for everyone to work? Thank You.
 
Hey Fantastico3,

You posted in the classifieds section. You need to post in the Hardware->NVRs, DVRs & Computers Section here: http://www.ipcamtalk.com/forumdisplay.php/15-NVR-s-DVR-s-amp-Computers

but, I believe you need to set the additional cameras on the switch as "Manual" instead of plug and play in the camera configuration screen.

Thanks,
 
You must log in or register to reply here.
Top Bottom