No alerts since I rebooted yesterday

[Heyok]

Arrived home from work and my wife said: Look on the monitor, you aren't home yet, and sure enough, a bunch of seconds later I could watch myself park in front of the house and walk inside. This made me decide that maybe it was time to reboot BI.
That went fine, but since then, no alerts!


This shows what I am talking about. Just after 4PM I restarted the BI computer. Since then, there's a nice rainbow of recording, but no notification marks!
I kind of like to be able to see that there are flagged alerts.
Any advice on what I can do to get them back?

Cheers,
Al

 

[Heyok]

Usually, there are lots of replies with helpful suggestions when I post about a problem!

That's okay, all is back to normal now.
TLDR: Reinstalled Deepstack

Here is what I think happened:
Blue Iris was running great, but as I mentioned, the video being shown on UI3 was very lagged.
I restarted the computer and installed the latest BI software update.
Sometime later I noticed that clips were not being flagged.

This morning I happened to read a post this post:

Warning Blue Iris Update 5.5.9.4 Might Kill DeepStack

I updated to Blue Iris 5.5.9.4 and DeepStack stopped working. I had to uninstall DeepStack and reinstall to getting it working again. I am still on 5.5.9.4 and the fresh install of DeepStack is so far working

ipcamtalk.com

In there, someone found that reinstalling Deepstack got things working again.
That turns out to be just what I needed to do

All is well again.