New to me hikvision system

C

craggie44443

n3wb
Mar 10, 2023
26
23
UK
I have recently bought a property with 4 Hik vision cameras and NVR with the property I have reset the admin password on NVR but do not have the camera passwords to allow me to connect them the previous owner was in a maintained contract with a company which I have no obligation to continue with and do not wish to continue with but they will not tell me the password for the cameras even if I was to pay my first month they will reconnect them remotely I have tried to do a password recovery through SADP but it times out when trying to download the XML file to send to hikvision. Is there any other way of resetting passwords.
I am no expert but I would rate myself competent and able to do my own maintaince. I have attached SADP screen shot with models of cameras and NVR.
Any help would be greatly appreciated
 

Attachments

  • IMG_20230515_195328_HDR.jpg
    IMG_20230515_195328_HDR.jpg
    5.3 MB · Views: 14
  • Like
Reactions: mat200
+1^^.
Specs found online for the DS-2CD2T65G1-I5 and the DS-2DE4220IW-DE state SD card storage which is the likely place for the hardware reset as mentioned above.

I would unplug all 4 initially then plug in one, perform reset, give it time to be recognized and online in the NVR before plugging in cam #2, #3, etc.
 
  • Like
Reactions: looney2ns, tech101 and mat200
wittaj said:
That would be the procedure.

Not sure where it is on that model, but hopefully it has a reset button next to SD card slot under cover.
Click to expand...
TonyR said:
+1^^.
Specs found online for the DS-2CD2T65G1-I5 and the DS-2DE4220IW-DE state SD card storage which is the likely place for the hardware reset as mentioned above.

I would unplug all 4 initially then plug in one, perform reset, give it time to be recognized and online in the NVR before plugging in cam #2, #3, etc.
Click to expand...
Thankyou guys shall get this done tomorrow and when the company phones me again asking if I want to take out the maintenance package I can politely tell them where they can go.
 
  • Haha
  • Like
Reactions: Parley, TonyR and mat200
TonyR said:
+1^^.
Specs found online for the DS-2CD2T65G1-I5 and the DS-2DE4220IW-DE state SD card storage which is the likely place for the hardware reset as mentioned above.

I would unplug all 4 initially then plug in one, perform reset, give it time to be recognized and online in the NVR before plugging in cam #2, #3, etc.
Click to expand...

note: adding camera information here for reference ..
DS-2CD2T65G1-I5 and the DS-2DE4220IW-DE



1684181498041.png
1684181518007.png


updates:

The Bullet lists having a hardware reset ..
1684186055165.png




1684183989398.png
 

Attachments

Last edited:
  • Like
Reactions: craggie44443
craggie44443 said:
Quarterly I believe
Click to expand...

They start at £200 for remote support .. Quarterly I believe

hmmm .. guess easy business for them once it is up and running ..
 
Last edited:
craggie44443 said:
Haha I shall pay you in gratitude and GIFs ........ But the forum does not let me upload GIFs. Lol
Click to expand...

Feel free to share what you end up doing to reset the cameras, a few key pictures would be very appreciated.
 
mat200 said:
They start at £200 for remote support .. Quarterly I believe

hmmm .. guess easy business for them once it is up and running.
Click to expand...

Yeah that's why I want nothing to do with them could just about replace all the cameras and NVR at that price.

mat200 said:
Feel free to share what you end up doing to reset the cameras, a few key pictures would be very appreciated.
Click to expand...

Will do will take what photos I can but all the cameras are at height so might just be blurry photos of me falling back to earth.lol
 
  • Like
Reactions: mat200
Well guys resetting them has gave me access to them but having issues getting them back on the NVR. First one goes on fine but when adding the second on the status it just says connecting and will not connect but I can connect to it through web browser.
Any suggestions?
 
  • Like
Reactions: mat200
Did you follow the instructions above?

If you plugged them all in at same time it will IP conflict.

What is IP address subnet of LAN?

What is the IP address of the NVR

What is IP address of 1st camera?

What is IP address of 2nd camera?

How are you accessing the 2nd camera thru the web browser - by going to a web browser and typing in NVR IP and then accessing camera that way or going straight to camera IP in a web browser?

Are you plugging these into the back of the NVR or are they on another switch?

What you may have to end up doing is manually adding them to the NVR instead of letting the NVR find them. But at the same time, give it some time - some people have reported 5-10 minutes before the next camera finally shows up the first time.
 
  • Like
Reactions: mat200 and SpacemanSpiff
wittaj said:
Did you follow the instructions above?

If you plugged them all in at same time it will IP conflict.

What is IP address subnet of LAN?

What is the IP address of the NVR

What is IP address of 1st camera?

What is IP address of 2nd camera?

How are you accessing the 2nd camera thru the web browser - by going to a web browser and typing in NVR IP and then accessing camera that way or going straight to camera IP in a web browser?

Are you plugging these into the back of the NVR or are they on another switch?

What you may have to end up doing is manually adding them to the NVR instead of letting the NVR find them. But at the same time, give it some time - some people have reported 5-10 minutes before the next camera finally shows up the first time.
Click to expand...
Thank you for your quick response I am doing them one at a time as above and accessing them through a browser with there IP address. After posting I changed the second cameras IP address and then rebooted NVR and hey presto the video feed has appeared on the second one.
The only thing is it has an external mic on it and there is no sound
Do I need to change a setting for the sound.
P.s. where do I send my subscription for this tech support to. This forum is full of amazingly helpful individuals thankyou all
 
  • Like
Reactions: mat200
You must log in or register to reply here.
Top Bottom