Hey so basically, in the cinema theater I work at, we have installed IP cameras in the control room of the screening room where we can get a live stream of what's going on inside. It's our way to know if everything is going well and if the film is ending or not etc etc. We don't record anything, they're plugged in the network and visualized through a software (Security Eye) connected to a PC. I should precise that I didn't set up the first set of cameras.
We opened a new screening room last week and therefore installed a new IP camera (Dahua IPC HFW2441T) that i plugged into the network. Security Eye manages to scan it on the network but when I try to add it, it just doesn't show anything. Pitch black, no info about a signal or anything. When i go to the specific webpage of the camera, I do get an image and access to the settings, though.
So I'm wondering if something in the settings "bothers" Security Eye or if I'm missing something network-wise.
I hope it's clear, I'm not really experienced with all this, learning by trying (and failing)...
Thanks for any advice.
Tanguy from France.
We opened a new screening room last week and therefore installed a new IP camera (Dahua IPC HFW2441T) that i plugged into the network. Security Eye manages to scan it on the network but when I try to add it, it just doesn't show anything. Pitch black, no info about a signal or anything. When i go to the specific webpage of the camera, I do get an image and access to the settings, though.
So I'm wondering if something in the settings "bothers" Security Eye or if I'm missing something network-wise.
I hope it's clear, I'm not really experienced with all this, learning by trying (and failing)...
Thanks for any advice.
Tanguy from France.