My first installation almost done ! I need advices !!!

Cesare

Cesare

Young grasshopper
Nov 26, 2016
45
11
Italy
Hello guys, I'm not a professional and I have try by myself to install my first implant in one of my little shops . The interior part is completed, I did everything by myself and I'm really proud of it , btw I surely did some mistakes so I need advices and suggestions. I must say thank you to @EMPIRETECANDY to have ship my stuff in a very quickly way and because of the availability to the shitload of questions I had to do before to buy my stuff. All the cables work is done now I just need to install the 2 external cams (hfw5431z and hfw8232z) now I need to learn how to set up them properly and if to modify something. Please give a look !

This is the nwr placed in an armored depot : model nvr5216-16p-4ks2 (I need a full HD monitor I'll buy it as soon !) firmware version 3.210.0002.2
 

Attachments

  • IMG_1689.JPG
    IMG_1689.JPG
    2.3 MB · Views: 382
  • Like
Reactions: EMPIRETECANDY
These are 2 azimuthal views : an hdw4431em-as 3.6mm on the left and a hdw4231em-as starlight 2.8mm on the right.
 

Attachments

  • IMG_1683.JPG
    IMG_1683.JPG
    2.3 MB · Views: 222
This is a varifocal hdw5431r-z looking the entrance door and a generic view on the right side of the shop
 

Attachments

  • IMG_1685.JPG
    IMG_1685.JPG
    1.9 MB · Views: 175
This is an hdw2320r-z looking the left side of the shop
 

Attachments

  • IMG_1693.JPG
    IMG_1693.JPG
    1.9 MB · Views: 113
This is another hdw2320r-z looking in the armored depot
 

Attachments

  • IMG_1690.JPG
    IMG_1690.JPG
    1.8 MB · Views: 119
Hdw 5431 varifocal ... I tried to work on hdr and other settings but results were not so good as expected. This is a view with default settings I gave up :-(
 

Attachments

  • IMG_1695.JPG
    IMG_1695.JPG
    1.3 MB · Views: 104
Hfw 5431e-z but I can't find how to set the shutter speed by nvr and I'm not able to set a subnet streem cutting a specific area of the fov :-(
 

Attachments

  • IMG_1775.JPG
    IMG_1775.JPG
    1,020 KB · Views: 101
  • Like
Reactions: ldasilva
hfw 5431e-z fov , default settings , 25fps h265 , seems good view and good plates reading too
 

Attachments

  • macedonia_rione_trieste_main_20170513120658.jpg
    macedonia_rione_trieste_main_20170513120658.jpg
    1.4 MB · Views: 72
Hfw 8232e-z wow 50 frames / second and the 1/1,9 sensor I suppose make the difference !!! I hope that led light will not disturb during the night time . If so I'll move it somewhere else
 

Attachments

  • IMG_1778.JPG
    IMG_1778.JPG
    1.6 MB · Views: 93
  • Like
Reactions: bigredfish
this is the hfw8232 fov but I cant set any ivs option by nvr, it says the cam does not support it :-(
 

Attachments

  • macedonia_somma_main_20170513124757.jpg
    macedonia_somma_main_20170513124757.jpg
    1.7 MB · Views: 87
  • Like
Reactions: c hris527
  • Like
Reactions: Cesare
Btw I'm still not able to set any ivs option by the nvr . I have got a ultra series too installed but nvr says it does not support ivs options :-(
 
Cesare said:
Btw I'm still not able to set any ivs option by the nvr . I have got a ultra series too installed but nvr says it does not support ivs options :-(
Click to expand...

I configured mine directly with the cameras. Through web interface doesn't work for me either. Directly at the NVR I didn't try yet.
 
Is there any tutorial about how to do it ? I'm not able to access from the web interface. My nvr have a LAN connection to the router and my laptop have a LAN connection to the same router. I can't access to the cameras but I think I messed something with virtual ports ...
 
You must log in or register to reply here.
Top Bottom