I just had an issue crop up where any movement in my cameras show up as pixelation. I have been running this system for about a year and this is recently started happening (I have 2 cameras connected). I'm running version 5.7.9.12, the PC has an Intel i7-9700 CPU with 32GB of ram and a WD Purple drive for storage with a Samsung 970 EVO 1TB drive for the OS. Any ideas?
Motion in BI results in pixelation
- Thread starter igaller
- Start date
Are you talking about the blue boxes or the little "halo" pixelation?
If it is the blue boxes, that is BI motion turned on.
If it is the little "halo" that is commonly seen in certain fields of view. Sometimes CBR and higher bitrate and lower noise reduction can eliminate it, but sometimes it is just there.
If it is the blue boxes, that is BI motion turned on.
If it is the little "halo" that is commonly seen in certain fields of view. Sometimes CBR and higher bitrate and lower noise reduction can eliminate it, but sometimes it is just there.
fenderman
Staff member
- Mar 9, 2014
- 36,891
- 21,407
You have enabled highlight motion
Trigger tab>motion sensor>configure