Hi,
I just installed a Dahua video intercom VTO2111D-WP door station with VTH5221D (firmware ver. 4.000.1026) monitors.
I have Hikvision cameras (i.e. DS-2CD2T85FWD-I8) and I would like to be able to view them on the monitors.
I have tried putting in the:
VTH5221D:
IPCS32 Name: Front camera
IP: 192.168.90.117
Username: admin
Password: same as Hikvision setting
Port: 80
Stream: Main
Protocol: Onvif
Cannal: 1
but it hasn't worked. What settings did you use?
Thanks.
I just installed a Dahua video intercom VTO2111D-WP door station with VTH5221D (firmware ver. 4.000.1026) monitors.
I have Hikvision cameras (i.e. DS-2CD2T85FWD-I8) and I would like to be able to view them on the monitors.
I have tried putting in the:
VTH5221D:
IPCS32 Name: Front camera
IP: 192.168.90.117
Username: admin
Password: same as Hikvision setting
Port: 80
Stream: Main
Protocol: Onvif
Cannal: 1
but it hasn't worked. What settings did you use?
Thanks.