Looking to switch to BI

M

Miacomo

n3wb
Oct 9, 2022
23
7
Pennsylvania
I'm currently using a DHI-NVR5464 with 45 cameras (32 running IVS rules) at 10fps @ highest resolution.

What's the experts recommend for PC specs to run this setup? Memory, processor speed, etc. Sorry for a basic question, but I'm new to BI. I researched this for a bit but still unsure exactly what's needed. TIA
 
Look in the WiKi, in the blue bar at the top of the page. There's a whole section for selecting hardware in there. Do it on a real computer, not a tablet or phone.
 
i'm a novice here, but an expert guided me towards an HP Elitedesk g4-800 i5-8500. for about 20 cameras. works fine, with WD purp drive,
 
  • Like
Reactions: Miacomo
you'll probably want an i7 8th gen or newer with 2 of the higher rotational speed "WD-PURZ" 7200 rpm Drives
 
  • Like
Reactions: Miacomo
My other machine is the Dell precision 3630 tower and it has bays for 3-3.5 inch spinning rust drives. And an onboard NVME M.2 slot. Bios limit of like 4 or 5Sata devices.
I’m streaming 11 cams with that. And it’s using 3-5% CPU.
 
  • Like
Reactions: sebastiantombs
so i chopped my fingers up with a saw,,,,hard to type,,,,izzat 8 mp cameras?
 
  • Sad
Reactions: sebastiantombs
or 6?
 
You must log in or register to reply here.
Top Bottom