Since 4.3.0.x rolled out last night I have had issues as have others with motion detection. With 4.3.0.3 I have simplified and normalized my detection settings across three cameras that look at my house. What I am finding is that the pink brick on my house is driving the detection crazy. It is just a very narrow range of pink color and with the changing light conditions at dusk it is very apparent. I have an entrance where the light came on and it looks like I have a mass of ants migrating as the sun goes down.
It does not appear to be noise because I now have one looking out the back and the camera is noisy but it is not triggering. The one of the front door is now almost calmed down compared to earlier. See the sequence of snapshots for examples.
It does not appear to be noise because I now have one looking out the back and the camera is noisy but it is not triggering. The one of the front door is now almost calmed down compared to earlier. See the sequence of snapshots for examples.
