Latest firmware for NVR5216-4KS2 hardware version 1.0 ?

I have a NVR5216-16P-4KS2 (hardware V1.0). A couple weeks ago I did a firmware upgrade and updated its V3 firmware to what I believe is the latest V4.

BTW, there's a couple of older discussions on the forum regarding NVR5216 firmware upgrades. Using the general information learned in them, I concluded the most current candidate for V1.0 hardware is V4.001.0000003.2 build 10-10-2020. The release notes shows that it is compatible with your NVR5216-4KS2 (V1).

I had success installing it. Steps summarized as follows:

1. Initial firmware was V3.216.0000006.0 build 2019-02-23.
2. Installed V4.001.0000000.1 build 2020-03-19. Confirmed working.
3. Installed V4.001.0000003.2 build 10-10-2020. Performed reset, re-installed cameras. Working well.

- Thomas
 
Last edited:
  • Like
Reactions: Mlda
ThomasCamFan said:
I have a NVR5216-16P-4KS2 (hardware V1.0). A couple weeks ago I did a firmware upgrade and updated its V3 firmware to what I believe is the latest V4.

BTW, there's a couple of older discussions on the forum regarding NVR5216 firmware upgrades. Using the general information learned in them, I concluded the most current candidate for V1.0 hardware is V4.001.0000003.2 build 10-10-2020. The release notes shows that it is compatible with your NVR5216-4KS2 (V1).

I had success installing it. Steps summarized as follows:

1. Initial firmware was V3.216.0000006.0 build 2019-02-23.
2. Installed V4.001.0000000.1 build 2020-03-19. Confirmed working.
3. Installed V4.001.0000003.2 build 10-10-2020. Performed reset, re-installed cameras. Working well.

- Thomas
Click to expand...

Thanks for the reply Thomas, I'm currently on V4.001.0000000.1 build 2020-03-19, so just need the last step. Where did you get the firmware image from ?

thanks
Jesper
 
You must log in or register to reply here.
Top Bottom