IP Cam R80X20-PQ after upgrade, the picture is rotated 180 degrees

rad0007

n3wb
Joined
Apr 22, 2022
Messages
1
Reaction score
0
Location
Czech republic
I tried to update my ip camera to the latest IPC_XM530_R80X20-PQ_WIFIXM711.711.Nat.dss.OnvifS_V5.00.R02(2021-08-18) firmware. The update was successful but the picture is rotated 180 degrees, so the heads of the people are down. I tried some older firmware but the picture is still rotated. Is there any way to rotate the picture in the settings or do I have to install the camera with the head down?
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
16,438
Reaction score
38,154
Location
Alabama
Have you tried opening the camera's embedded webGUI using a browser like Internet Explorer 11 and the camera's IP address? You'll then likely be required to install a plug-in which you agree to and it will be downloaded from the camera.

Once that is done then log in with its username and password then go through the webGUI configuration menu and tabs; something like "settings", then "video", "flip", "mirror", or the like. If you find the setting and change it, remember to click on "save" or "OK".

EDIT: Welcome to IPCT ! :wave:
 
Last edited:
Top