gpower07
Getting comfortable
new install with 2 4mp turent cams. and 2 2mp and 5mp longse cams. only the ptz up and running.
Huison PTZ 10X
- Thread starter gpower07
- Start date
SquareEyes
Getting the hang of it
- Joined
- Sep 29, 2015
- Messages
- 241
- Reaction score
- 71
Interesting.
From the look of things, I am wondering if there is a beam on the other side of the zinc that the junction box is mounted to, because I can't see a row of tek-screws that would indicate a cross member behind the zinc?
I can see tek-screws about 20% up the lettering. If there is no beam/cross-member behind the junction box, I would be concerned about vibration of the camera. At zoom any vibration is amplified by a magnitude. Hope that I am wrong.
From the look of things, I am wondering if there is a beam on the other side of the zinc that the junction box is mounted to, because I can't see a row of tek-screws that would indicate a cross member behind the zinc?
I can see tek-screws about 20% up the lettering. If there is no beam/cross-member behind the junction box, I would be concerned about vibration of the camera. At zoom any vibration is amplified by a magnitude. Hope that I am wrong.
gpower07
Getting comfortable
Very tight. No movement on the camera. There is a big steel beam behind....but the camera is not mount on the beam. And the zinc is not moving even if i pull the camera to left and right.