Hikvision I/O Interface DS-2FM2466

[basti76nie]

Hi guys,

i’m looking for a HikVision NVR with 8 x Inputs AND 8 x Outputs.
The cheaper ones doesn’t support the amount of 8 x outputs (only one).
So I found the new I/O Interface from HikVision D-2FM2466.
I heard i could connect at least 5 or 6 of them to a NVR-I.
Are there any further information or experience?

 

[SamM]

Hi There

Will this product not suit your requirements?

Hikvision Europe AxHub

content.hikvision.com

I assume that you will connect some sort of alarm devices that would send notifications via a self monitoring app as well as record the incidents.

 

[basti76nie]

You‘re right!
I need two outputs for each AcuSense IPC. But the recent IPCs supports only one Output.
The first output (for motion detection) should switch a lamp for the outside by night.
The second output (line crossing) should send a trigger to the Smart-Home System.

 

[trempa92]

AxHub is old news, AX PRO is newer version.

AX PRO

Simplicity through innovation. By utilizing dual-chip technology, the AX PRO Hub ensures that data transmission is stable and reliable. And equipped with Hikvision’s IVaaS technology, it supports flexible linkage with IP cameras or PIRCAMs.

www.hikvision.com

DS-PM1-O1L-WE 12V

DS-PM1-O1H-WE 220V

With these relays u can even make schedule trigger or keyfob trigger or trigger by app. Or in your case trigger by IPC event.