brendangoleby
n3wb
Hi everyone.
I have a 32 channel i series NVR (DS-7732NI-I4 / 16P) and the DS-2CD2387G2-LSU/SL turret camera below. When someone triggers the line crossing I would like to activate all the 4 lights on the front of the house. Any suggestions on what would be best practice to use. I’m thinking some sort of 240V relay, that will activate a two way switch. (assuming using relay on back on NVR)
I have looked at some options with Shelly switches, but am leaning towards integration with Hikvision AX PRO relay eg. DS-PM1-O1H-WB (Relay output1, NO/NC (AC 100~240v, Max 13A）
Couple of concerns I have
a) if the lights are on, I want them to stay on
b) when I turn the lights on via relay, I want to turn them off in approx 10 minutes approx.
Does anyone have any other suggestions of a better way to set this up.
Thanks
Brendan
I have a 32 channel i series NVR (DS-7732NI-I4 / 16P) and the DS-2CD2387G2-LSU/SL turret camera below. When someone triggers the line crossing I would like to activate all the 4 lights on the front of the house. Any suggestions on what would be best practice to use. I’m thinking some sort of 240V relay, that will activate a two way switch. (assuming using relay on back on NVR)
I have looked at some options with Shelly switches, but am leaning towards integration with Hikvision AX PRO relay eg. DS-PM1-O1H-WB (Relay output1, NO/NC (AC 100~240v, Max 13A）
Couple of concerns I have
a) if the lights are on, I want them to stay on
b) when I turn the lights on via relay, I want to turn them off in approx 10 minutes approx.
Does anyone have any other suggestions of a better way to set this up.
Thanks
Brendan