Hello,
I have several Hikvision cameras from the last couple years, without NVR. I have all the cameras setup via web interface to use two different storage media: an internal 128GB microSD, and a NAS in the house. Both media are seen correctly configured and formatted.
In the storage management page, the microSD appears always on top and it seems to be the only one where anything is recorded. The second line, the NAS, shows "Formatted" but nothing gets recorded there, ever If I remove the microSD, media is recorded in the NAS just fine.
I setup both media to have location redundancy: if a thief steal the camera with its microSD inside, it I will have a recording in the NAS hidden somewhere in the house. Alternatively, the microSD is more reliable if something happens to the NAS, freezes up or reboots or else.
So ideally I was expecting to have the camera record on both media at the same time but this is not the case. And it does not record on the second media when the first is full either. Basically the second media, the NAS, is there doing nothing!
Do anybody knows what is the recording management of these cameras when more than one storage option is available? any way to use them in parallel or sequentially?

I have several Hikvision cameras from the last couple years, without NVR. I have all the cameras setup via web interface to use two different storage media: an internal 128GB microSD, and a NAS in the house. Both media are seen correctly configured and formatted.
In the storage management page, the microSD appears always on top and it seems to be the only one where anything is recorded. The second line, the NAS, shows "Formatted" but nothing gets recorded there, ever If I remove the microSD, media is recorded in the NAS just fine.
I setup both media to have location redundancy: if a thief steal the camera with its microSD inside, it I will have a recording in the NAS hidden somewhere in the house. Alternatively, the microSD is more reliable if something happens to the NAS, freezes up or reboots or else.
So ideally I was expecting to have the camera record on both media at the same time but this is not the case. And it does not record on the second media when the first is full either. Basically the second media, the NAS, is there doing nothing!
Do anybody knows what is the recording management of these cameras when more than one storage option is available? any way to use them in parallel or sequentially?
