Flir IP Camera wont up

RT400

n3wb
Joined
Nov 23, 2022
Messages
4
Reaction score
0
Location
Israel
Hi,
I have flir ip camera that wont up.
i connect to rs232 and see this output :

Code:
U-Boot 2010.06-svn2635 (May 28 2015 - 10:21:40)
I2C:   ready
DRAM:  256 MiB
gBootLogPtr:80580008.
NAND:  HW ECC BCH8 Selected
128 MiB
partition file version 2
rootfstype squashfs root /dev/mtdblock7
TEXT_BASE:80a00000
Net:   Ethernet clocking: 0x52
Detected MACID:0:40:7f:79:6e:73
B50612E found

link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x84000000
Downloading:
Retry count exceeded; starting again
Try again use backup_serverip
link up on port 0, speed 100, full duplex
*** ERROR: `serverip' not set
Failed to get info.txt
Fail to get info file!
Init error!
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x81000000
Downloading:
Retry count exceeded; starting again
## Booting kernel from Legacy Image at 81000000 ...
   Image Name:   uImage
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4588224 Bytes = 4.4 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock7
can't find corresponding entry
fail to resolve
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
get bootargs info failed
cmdLine console=ttyO0 rootfstype=squashfs root=/dev/mtdblock7 init=/linuxrc mem=144M vram=4M notifyk.vpssm3_sva=0xBFD00000 cmemk.phys_stazt=0x89000000 cmemk.phys_end=0x8a000000 cmemk.allowOverlap=1
crashflasg:1, logmagic:54410011.

Starting kernel ...
Any idea ???
 
Top