I had everything up and running at a test site so I moved NVR to the finale spot plugged in 4 camera's and now only one works the other 3 say failed to find host. What happened? When I searched for the camera's 4 come up with green check mark but when I add 3 go to red dot and one is green.
Failed to find network host
- Thread starter ponyrider127
- Start date
bigredfish
Known around here
You have to allow the Cameras to come up on the NVR by themselves (assuming a PoE NVR). You shouldnt manually move them from top to bottom pane. Sometimes it takes a while for the NVR to see them. Reboot and wait works 99% of the time and they will auto populate to the bottom pane.
This has been a large learning curve. The wife say's I'm like a dog with a bone. I have gone from knowing nothing all the way to setting up the VPN server, I have had lots of good reading and some help from good people on the site. The only thing left is the POE switch that I have to get yet.
Thank you all that has helped.
Thank you all that has helped.
