Enster PTZ no signal

P

patriot20001

Young grasshopper
May 31, 2015
54
6
Hi guys,
I have lots of Hiks and no issues but recently I bought this Enster PTZ camera and what ever I do I ant get a signl on Blue Iris. RTSP 451. It is set as Generic RTSp H.264 etc. Correct user and pw but nothing.
I can login and vew on browser no prob. Ca anyone help me please!!!!.. thanks you guys
 
Hi mate, you saved my life! I have it working now. Thank you. if you don't mind could you tell me how to get the PTZ working on it??

Thanks again
 
Camera Properties
PTZ/Control
Enable Pan/Tilt/Zoom
Tick Network IP and use IPC,CantonK
 
  • Like
Reactions: patriot20001
Under Video, do you have it set up as:

Make: Xmeye
Model: H.264 port 34567

?

If so, then those settings for PTZ should work (I own one).
 
  • Like
Reactions: patriot20001
Hi Ssayer, I have it set like this but in the actual camera what should I have the PTZ controls set as? cheers mate
 
Hi Ssayer, thanks for the help but I think my cam is broken. It moves on start up but I cannot control the ptz from the web or from the BI. nightmare.
 
I have mine setup a little different : on video tab,generic,RTSP H 2.64/MJPG/MPEG4. On PTZ tab, OXML. I'm not sure but I think in the camera setup itself, I had to play with the protocol using PELCOD1.2400,. Mine works fine with these settings.
Roger
 
You must log in or register to reply here.
Top Bottom