Eliminate TCP port 10080 - Need NVR NVR5224-24P-4KS2 Security Update firmware

[gr8tech]

Hi Andy,
Can we please get an updated NVR firmware from the developers for the NVR5XXX that eliminates the use of TCP port 10080 for the management of the camera and provides the bridge mode alternative for the POE switch ? That is, instead of starting the POE TCP port assignment starting at 10080, it can start from 10081.
I have two NVR5224-24P-4KS2 that I got from you that are problematic with managing the camera assigned with the 10080 port.

It has been a few years now that port 10080 has been blocked on most browsers and it makes it frustratingly difficult for users to manage that first camera assigned to TCP port 10080.

 

[bigredfish]

I thought that had been resolved?

5216-16P-4KS2E no problem

 

[ThomasCamFan]

As as long as we are here to dream, I'd like this for a NVR5216-16P-4KS2 V1.

- Thomas

 

[gr8tech]

I thought that had been resolved?

5216-16P-4KS2E no problem

View attachment 192132 View attachment 192133 View attachment 192134

Good to know and I would expect it to be resolved in a later release than System Version: 4.001.0000006.1 Build Date: 2021-07-09
2021-07-09 is the only last version i've seen posted here from Andy for NVR5XXX.

Is the V4.002.0000000.3.R.2022-03-22 posted here ?

 

[bigredfish]

Pretty sure I got that from Dahua's site.

Now that that NVR is EOL, not sure youy'll see anything new from Andy.
The Dahua site does have a newer FW which I have running fine on my spare 5216

https://www.dahuasecurity.com/search/products?keyword=5216-16P-4KS2E