DS-KV8113 + analog doorbell

[gkoutsis]

I have a KV8113 setup which works fine for the notifications on my phone and all.

However, I would like to connect it to my old analog doorbell chime I used to have before.
Can it be done somehow?

My understanding is that I just need it to output a close circuit when the button is pressed.

Thanks!

 

[Gimmons]

The problem is that your analog bell probably runs on 24v ac. If you just solder your bell wires onto your intercom button terminals, something in your intercom will fry. You might be able to do it with a relay or a transistor controlled by whatever signal voltage runs through your intercom button.