Directly accessing camera's behind Dahua NVR4104 POE

[dutchblook]

Hello all,

I have bought a Dahua NVR4104-poe and the Huisiun bullit camera that is widely discussed here.
Have them both up and running, but encounter one issue.

The Dahua NVR has 4 POE ports that are on a separate network segment. I want to access the Huisun camera (hik protocol) directly.
This because the presets via the dahua dont seem to work and they do via the webinterface of the camera itself.

Putting the camera in my home network is a possibility but not preferred since i need additional networkports and a separate power injector.

Is there a way to get access directly? couldnt find any information in the manual.
read around in the forum and no similar question yet

All tips appreciated.

 

[Dolamite]

You may have more success with help if you repost this in the Hardware forums.

 

[nayr]

you have to plug into the PoE ports on the back and get onto the same network as the cameras.. they will not route traffic from its internal network to your LAN.