Day/night mode via HTTP for E541F-E2-AS

[HHSquared]

I found this thread (attached below) about utilizing HTTP requests to trip cameras into Day/Night mode but for some reason, I cannot seem to make the code work for the Empiretech E541F (AKA Boob cam)...I'm assuming it's since it's multi-channel but cant be positive. Has anybody had any luck?

Dahua day/night switch utility - DahuaSunriseSunset

I wanted to use stronger noise reduction at night and weaker during the day, but Dahua seems to have made a mess of the profile management. On most cameras, there doesn't seem to be a way to have the camera switch automatically between Day and Night profiles when the camera changes between...

ipcamtalk.com

 

[wittaj]

Assuming it is the old GUI it works with the boobie cam. I used it for years on two boobie cams.

Poat the API you are using if you aren't using the utility.

 

[HHSquared]

Assuming it is the old GUI it works with the boobie cam. I used it for years on two boobie cams.

Poat the API you are using if you aren't using the utility.

Yup, it is the old GUI (Gray and white). API is:
Day: Username: PW@#@10.11.12.10/cgi-bin/configManager.cgi?action=setConfig&VideoInMode[0].Config[0]=0
Night: Username: PW@#@10.11.12.10/cgi-bin/configManager.cgi?action=setConfig&VideoInMode[0].Config[0]=1