Dahua 2231 damaged RJ45 connector replacement wiring

[nl635]

Hi,

RJ45 connector on my dahua 2231 camera got watter damaged and burned, so I wanted to replace it with keystone. Problem is that wiring colors doesnt match at all. There are only 6 wires(blue, brown, green, green/white, orange, orange/white). Do you have any idea how to match them with T-568B colors?

 

[wittaj]

IPC-T5442T-ZE PoE Pinout Tip - For Broken Connector RJ45

I just wanted to make a post to help others in the future. Recently I damaged the end of my connector on IPC-T5442T-ZE Black Camera. Dahua IPC-T5442T-ZE uses the T568A pin out. Not the B more prevalent method here is US. Originally I had it wired like image IMG_9537.jpg (B). However camera...

ipcamtalk.com

 

[TonyR]

Try this, RJ-45 male (ignore the shown colors) and female shown below for pin number location, depending on which one you choose.
Ignore the T-568B colors shown on the male below, yours will be a modified T-568A in that there is no Blue/white on pin 5 or Brown/white on pin 7.

Pin 1 = GREEN/WHT
Pin 2 = GREEN
PIN 3 = ORANGE/WHT
PIN 4 = BLUE
PIN 5 = NO CONNECTION
PIN 6 = ORANGE
PIN 7 = NO CONNECTION
PIN 8 = BROWN

 

[nl635]

Nice, its working. Even POE its working. I tought that camera was dead

Thank you