Control PTZ with static camera

[mickiete]

I have 1 static camera covering an area, to control 1 ptz camera fitted.
On the static camera I want 4 zones to control the ptz to certain areas on motion,
Is it best to clone the static camera 4 times with 1 zone on each clone camera, or just put the 4 zones on 1 camera.

TIA

 

[wittaj]

I would recommend 4 clones to give you the most flexibility.

1 camera with 4 zones can be problematic under certain scenarios

 

[mickiete]

Thanks for that, you confirmed what I was thinking.