Changing IP 10.1.1.x to 192.168.x.x

[coldieee01]

Hello. Is there any way to change the IP "10.1.x.x" into "192.168.x.x" ? I'm using dahua xvr

 

[TonyR]

Specifically, which IP...the XVR's LAN IP or the private subnet of a POE cam that is plugged into one of the XVR's POE ports?

 

[coldieee01]

Specifically, which IP...the XVR's LAN IP or the private subnet of a POE cam that is plugged into one of the XVR's POE ports?

We use POE Switch and the xvr doesnt have poe ports. so it is the private poe cam.

 

[TonyR]

We use POE Switch and the xvr doesnt have poe ports. so it is the private poe cam.

In that case log into each cam's webGUI, one at a time, using it's known IP and assign it a unique, static IP in the desired subnet, the same subnet as the XVR's LAN IP; if there's a router in that same LAN subnet be sure to use IP's that are OUTSIDE of that router's DHCP pool.

Set your PC to a static IP in the current subnet of the cams, such as 10.1.1.20, subnet mask of 255.255.255.0, no gateway then log into each cam one at a time and perform the above. When the last camera has been configured as desired, set the PC back to the the way it was.

 

[bigredfish]

The cameras must have at some point been plugged into a Dahua NVR for them to have 10.1.1.x addresses. The default on all Dahua cameras is 192.168.1.108