Has anybody else had difficulty changing the defaults ports?
Mine just refuses to do it :mad-new:
Mine just refuses to do it :mad-new:
Cannot change ports on Mini PTZ v2
- Thread starter LeeH
- Start date
I can only find the v1 firmware thread and the Huisun site is pants.
Edit. Fond your thread thanks.
Edit. Fond your thread thanks.
Last edited by a moderator:
Let us know if you are successful.
i updated the firmware in my v2 and can't get to the web gui any more. I think I may have forwarded port 80. I haven't been able to reset it either.
All good for me port wise.
Port 80 is default isn't it? So clear you cache and try again using IE. If you have used say port 1000 use 192.168.1.100:1000 using your IP of course.
Port 80 is default isn't it? So clear you cache and try again using IE. If you have used say port 1000 use 192.168.1.100:1000 using your IP of course.
Regardless of what I set the port to my nvr picks it up under port 80.i can't access via Web gui. Very frustrating
Sent from my SM-N920T using Tapatalk
Yes I have a similiar situation.
I am picking up video using port 80 and rtsp 554 on LiveCams Pro app but cannot get to gui on port 80 to change any configuration. I cleared my cache and tried a different PC (my laptop) as well.
I am able to also get to it with ivms-4500hd app using port 8000
I can view the camera via ivms and smartpss and it will detect it under port 37777 which I set it to under sadp. But it just doesn't play well with my poe nvr. I'm hoping putting it on a poe switch allows me to access Web gui. Just have to buy a switch.
Sent from my SM-N920T using Tapatalk
I'm using a poe switch and also tried a external 12v power supply just to see if that made a difference.