I have a PTZ camera and I'd like the camera to go to a different preset based on the BI profile. Is this possible? Thanks!
Can a profile also set a PTZ preset?
- Thread starter 105437
- Start date
Help me fine tune setting up spotter cams for my SD4A425DB-HNY mini-PTZ
I bought a SD4A425DB-HNY mini-PTZ in Andy's last sale and have been going through all the trials and tribulations of getting it set up and functioning to auto-tracking to using spotter cams. It has been a long, mostly painful journey, a lot of which has been discussed via PMs with @wittaj , but...
Check through this post and see if it helps you.
See this thread as well where I show where to set it up based on profile, but here is how:
Open up the camera settings and select the Schedule tab.
Then at the bottom right is an "Events Schedule" button. Select it.
Then you get a menu where you can tell it to go to different presets based on time of day or with sunrise/sunset. If you don't have different ones, then just enable a schedule that is the same preset, or you can do as I did and have different presets for different times of days.
ipcamtalk.com
Open up the camera settings and select the Schedule tab.
Then at the bottom right is an "Events Schedule" button. Select it.
Then you get a menu where you can tell it to go to different presets based on time of day or with sunrise/sunset. If you don't have different ones, then just enable a schedule that is the same preset, or you can do as I did and have different presets for different times of days.
Using Spotter Cameras to direct a PTZ where to look in an NVR or Blue Iris and setting a spotter cam as a priority in Blue Iris
We get this question from time to time, so I thought with the recent addition to BI, it made sense to have a thread we can point to. Previously in BI, if you had more than one spotter cam, you could not make one a priority, so if spotter cam #1 triggered the PTZ and it starts tracking and...