Buscando solución a la desconexión de cámaras Dahua

El marco de circunstancia del problema es el siguiente;
Tengo un cliente con un XVR Dahua de 16 canales, instaladas 4 cámaras dahua de 5mp tipo bala, distancia entre las cámaras y el XVR aproximadamente 15 metros cada una. Utilizo Balun rj45, una fuente ventilada de 12V 10 amp para el XVR y otra (con divisor) de 12V 20 amp para las cámaras. El cable es Cat5e 100% cobre.
Problema: Las cámaras se fueron apagando de una en una. Ahora cuando las conexiones suceden que después de vincularla y tratar de adherir la 2da. la 1era se apaga.
Ahora bien, retire el equipo, y hago ese procedimiento en otro lugar y no sucede nada de eso.
¿Será un tema referido a la corriente eléctrica o la tensión eléctrica de ese lugar? Ya revisé las fuentes y su medición es correcta. ¿Serán los balun que fallaron despues de un tormento? ¿Será el cableado?
Pero lo más importante, si al momento de instalarlas las cámaras se veían (con cierta interferencia o "lluvia") ¿Por qué fueron desapareciendo lentamente?
Espero poder sugerirme alguna alternativa de solución.
Gracias.
 
I translated
The framework of the problem is as follows;I have a client with a 16-channel Dahua XVR, 4 Dahua 5mp bullet cameras installed, distance between the cameras and the XVR approximately 15 meters each. I use a Balun rj45, a ventilated 12V 10 amp source for the XVR and another (with a splitter) of 12V 20 amp for the cameras. The cable is Cat5e 100% copper.Problem: The cameras were turning off one by one. Now when the connections happen that after linking it and trying to attach the 2nd one, the 1st one turns off.Now, I removed the equipment, and I do that procedure in another place and nothing like that happens.Could it be an issue related to the electric current or the electric voltage of that place? I already checked the sources and their measurement is correct. Could it be the baluns that failed after a storm? Could it be the wiring?But most importantly, if the cameras were visible at the time of installation (with some interference or "rain"), why did they slowly disappear?I hope you can suggest an alternative solution.Thank you.(Edited)Restore original