Bug After Latest iDMSS App Update?

[Jason Hill]

We have 2 x Dahua VTO2000A door stations on our network at home:

Front Gate (IP 192.168.0.252, port 37739)
Garage Door (IP 192.168.0.251, port 37777)

The router is configured to forward our public IP address to each door station based on the above ports. We can access each door station via the public IP address in the iDMSS app and see the correct live camera feed for each door station. However, the live feed for the Garage door shows "Front Gate-channel 01" instead of "Garage Door-channel 01". Also, when we unlock the Garage Door, it actually unlocks the Front Gate instead.

This all used to work fine but it seems that there was an update to the app recently that might have introduced this bug.

When accessing each door station via the internal IP addresses then the Garage Door feed shows the correct device name and the unlock is working correctly and unlocking the right door. However, when using the same public IP address for both door stations in the app, the feed shows the wrong device name and unlocks the wrong door station for the Garage Door.

Has anyone else experienced this issue?

 

[bigredfish]

Lots of problems with the 4.40 app version.
Newest iDMSS app 4.40.000 is borken

 

[Jason Hill]

I managed to work around this issue by creating a couple of DNS A records pointing to my public IP address and using a different DNS name for each door station. Everything is all good then, so it seems to be a problem when the door stations are setup with the same address in the app but they have different ports.