- Oct 12, 2017
- 5
- 0
Hello Friends
I have Dahua DVR Model no: 5108H and i tried to put new firmware for this model at that time unfortunately power has been interrupted. Now DVR is struck on boot and tried to access through TFTP mode.
I successfully access the DVR through TFTP Mode but I am getting error while giving this command RUN UP.
I had attached the picture below
Thank you
I have Dahua DVR Model no: 5108H and i tried to put new firmware for this model at that time unfortunately power has been interrupted. Now DVR is struck on boot and tried to access through TFTP mode.
I successfully access the DVR through TFTP Mode but I am getting error while giving this command RUN UP.
I had attached the picture below
Thank you
