Bosch DRH-5532-414N00 Hybrid Recorder

[FlashyChrome]

Hello all!

Hopefully, someone has experience with my particular situation. I picked up a used Bosch DRH-5532-414N00 Hybird Recorder (

https://cdn.commerce.boschsecurity....H_5532_414N00_Data_sheet_enUS_80004880011.pdf

). To replace my slowly dying Lorex DVR with analog cameras. This is a hybrid recorder, I can use my old analog cameras, and slowly move over to IP cameras.

However, I can't get the Bosch recorder to properly communication with the Lorex analog cameras. The recorder is always displaying, "Resolution too high to display" no matter what resolution setting pick.

So, I decided to order an Reolink RLC-510A ([Official] Reolink RLC-510A - Smart 5MP PoE IP Camera with Person/Vehicle/Animal Detection) to test out the IP functionality of the Recorder...and I can't get that one to work either. The Bosch recorder can't login to the camera, on port 80 or 443. The camera is suppose to support ONVIF profile T and the recorder supports up to profile S.

So, I can't figure out what I am doing wrong... I am sure the issue is me...

Any help/directions is appreciated.

 

[looney2ns]

I don't know the answer to your question, but I wanted to mention that beside's their doorbell cam, everything else from Reolink should be avoided.
Terrible cams and company.

 

[FlashyChrome]

I don't know the answer to your question, but I wanted to mention that beside's their doorbell cam, everything else from Reolink should be avoided.
Terrible cams and company.

Really? I guess I'll pack it up and send it back. I knew they weren't top ... but didn't know they were that bad.

I guess I'll give a Hikvision cam a try... I think I saw one on sale.