Hi All,
Couple of issues that I can't seem to resolve, Searched over the last 2weeks without being able to find a solution, contacted Ken at tech support but he was unable to reproduce the issue, Hoping someone has come across this;
Here is my issue;
I made some changes to the camera layout. The full-screen alert feature is still functioning correctly; Blue Iris is successfully triggering a camera to display in full screen on the external monitor.
However, since playing around with the layout of my camera's, I've noticed a change in behaviour. Previously, when multiple cameras were triggered, they would mix together on the screen (I could have 2, 3, 4+ camera's displayed at the same depending on how many triggered). For example, if camera 1 was triggered, it would display in full screen. Then, if camera 2 was triggered, both camera 1 and camera 2 would be shown together. Now, it only displays one camera at a time. When another camera is triggered, it waits until the first one is done before displaying the second.
For the life of me, I can’t figure out what I changed to change this, Basically I stuffed something when I changed the layout and then it started behaving like this?
I have a 2nd issue which I also can't figure out, I have 8 camera's total, 6 using ONVIF for motion, and the other 2 using blueiris for motion. The ONVIF camera's are working correctly (I.e generating Alert's), however the other 2 camera's, trigger but won't post an alert? Also tried playing with the settings, but cannot figure it out?
Thanks in advance
Daniel
Couple of issues that I can't seem to resolve, Searched over the last 2weeks without being able to find a solution, contacted Ken at tech support but he was unable to reproduce the issue, Hoping someone has come across this;
Here is my issue;
I made some changes to the camera layout. The full-screen alert feature is still functioning correctly; Blue Iris is successfully triggering a camera to display in full screen on the external monitor.
However, since playing around with the layout of my camera's, I've noticed a change in behaviour. Previously, when multiple cameras were triggered, they would mix together on the screen (I could have 2, 3, 4+ camera's displayed at the same depending on how many triggered). For example, if camera 1 was triggered, it would display in full screen. Then, if camera 2 was triggered, both camera 1 and camera 2 would be shown together. Now, it only displays one camera at a time. When another camera is triggered, it waits until the first one is done before displaying the second.
For the life of me, I can’t figure out what I changed to change this, Basically I stuffed something when I changed the layout and then it started behaving like this?
I have a 2nd issue which I also can't figure out, I have 8 camera's total, 6 using ONVIF for motion, and the other 2 using blueiris for motion. The ONVIF camera's are working correctly (I.e generating Alert's), however the other 2 camera's, trigger but won't post an alert? Also tried playing with the settings, but cannot figure it out?
Thanks in advance
Daniel