Audio support on LTS CMIP3142W-28S (Hikvision DS-2CD2542FWD-IS(B))

It will work with hikvision settings..ensure Audio is enabled in the video settings of camera..
 
This was tested here and didn't work. Have you tested this model?
 
Last edited:
Ended up finding that this model requires a specific setting on its own camera interface to enable audio on the video stream, on settings/config > video and audio > Video Type: Video and Audio. So, works flawlessly.

I would like to add that now this model is directly supported on the latest Blue Iris.

IGBnku2.png
 
technet said:
Ended up finding that this model requires a specific setting on its own camera interface to enable audio on the video stream, on settings/config > video and audio > Video Type: Video and Audio. So, works flawlessly.

I would like to add that now this model is directly supported on the latest Blue Iris.

IGBnku2.png
Click to expand...
That is required by every hikvision camera with audio.. that's why I suggested you check that setting..
 
When said "ensure audio is enabled in the video settings of camera" I've understood on the video settings of Blue Iris, not on the settings at web interface of camera.
 
technet said:
When said "ensure audio is enabled in the video settings of camera" I've understood on the video settings of Blue Iris, not on the settings at web interface of camera.
Click to expand...
no the camera, that is why i wrote "of the camera", in blue iris as you know, the video and audio settings are separated. There are several other threads that discuss this problem and solution..
 
You must log in or register to reply here.
Top Bottom