Audio not working with LTS CMIP8932-W

[whome]

Hello! I have recently purchased and installed some LTS cameras and have the video working with Blue Iris just fine. I just talked to LTS to get the audio working on the cameras by just connected to them directly. However, I can't get Blue Iris to record or play audio live. Here are my Blue Iris settings:

Application
Audio > Output > Device > "(Not specified)"

Camera
Audio > Enable audio capture hardware > checked
Audio > IP camera stream > selected
Record > Video Format > "Blue Iris DVR"
Record > Re-encode with settings: > "H264 - H.264/MPEG-4 AVC"
Record > Re-encode with settings: > "recording 0"
Record > Re-encode with settings: > "recording 0" > "AAC"

That's all that I can think of right now. Hopefully someone has some thoughts on how to get things working!

Thanks for the help!

 

[fenderman]

@whome, in the camera interface, under video make sure video and audio is selected, not simply video.

 

[whome]

I just wanted to update this thread with what I did to fix the problem. It was ultimately a Blue Iris setting that I had to change for each camera. Fenderman got me on the right track with the video suggestion. I had to tell Blue Iris to record the audio data by setting up an audio directory and changing the recording type to RTSP. I've included screenshots of the 3 menus I had to navigate through. Hopefully this helps someone else!