Hi,
I am the developer of this small free & open-source generic discovery tool here:
ipcamtalk.com
It looks like this:
I am looking someone who is using an Ubiquiti solution and is able to give me some help to finish to add Ubiquiti discovery protocol into my tool.
If you agree, you would need to make a Wireshark capture while using the discovery tool of Ubiquiti and receiving device's answer, following this detailed procedure.
The goal is to collect enough information for me to integrate Ubiquiti as new detection protocol.
Data are use only by myself for protocol reverse engineering and deleted after usage, they are not kept and not shared.
If anyone interested to help me on this free project, just let me know.
Thanks!
Julien
I am the developer of this small free & open-source generic discovery tool here:
Universal IP tool for Axis, HikVision, Dahua, Bosch, Hanwah, Vivotek, Panasonic, Flir, etc.
Hi everyone, I am working on an open-source project I would like to share with people used to play with videosurveillance cameras and propose you to participate. This is small unique tool that scan a network and can detect several camera vendors, using open protocols (ONVIF, UPnP, etc.) but...
It looks like this:
I am looking someone who is using an Ubiquiti solution and is able to give me some help to finish to add Ubiquiti discovery protocol into my tool.
If you agree, you would need to make a Wireshark capture while using the discovery tool of Ubiquiti and receiving device's answer, following this detailed procedure.
The goal is to collect enough information for me to integrate Ubiquiti as new detection protocol.
Data are use only by myself for protocol reverse engineering and deleted after usage, they are not kept and not shared.
If anyone interested to help me on this free project, just let me know.
Thanks!
Julien