Ankee C800 mainstream issues

[Brandon1994]

Hello,

This is a weird one for me. I'm using a few C800s with the latest version of Blue Iris and after putting it in my substream it works great in BI. I can click the camera I want, and then it will display the mainstream. The problem happens in UI3. It will only load the substream and not the mainstream. Here is how they are configured. My Amcrest cameras work fine.
I tried on two different Ankee's as well as another Substream and that didn't help.

 

[TonyR]

The cam with the IP of .53...where the heck did that sub stream URL come from?

Did you put in the IP, username, password and click on "Find/inspect" and let BI populate the stream path for main stream?

 

[Brandon1994]

The cam with the IP of .53...where the heck did that sub stream URL come from?

Did you put in the IP, username, password and click on "Find/inspect" and let BI populate the stream path for main stream?

I found that from someone on this forum that was having the same issues and that was what fixed it for them. Yes, I tried that and it never fills in the substream