Just updated and having issues replaying clips in 4.3.0.8. This is specifically when the "test run clip through motion detection" is enabled during replay.
Anyone else with this issue?
Anyone else with this issue?
4.3.0.8 Crashes During Clip Replay
- Thread starter mcutugno
- Start date
fenderman
Staff member
- Mar 9, 2014
- 36,891
- 21,407
fenderman
Staff member
- Mar 9, 2014
- 36,891
- 21,407
I have an Amcrest camera too and tested it: I get the crash too! Moves one or two frames and then I get the Windows message that BI needs to close. Only with the test run checked and only on my Amcrest 1080 camera.
Mike
Mike
Just discovered a temporary work around for this problem. At least it worked for me. Open the .bvr file from windows File explorer. When it plays back in Blue Iris you can uncheck the "Test run video through motion detector". I can now play videos in BI as long as I don't check the test option.
Edit: you can check and uncheck the "Test" option while playing back from File Explorer, But not from BI initiated playback. It will fail as soon as you check the test option from BI initiated playback.
Edit: you can check and uncheck the "Test" option while playing back from File Explorer, But not from BI initiated playback. It will fail as soon as you check the test option from BI initiated playback.
That's good to know. What I did was I just brought up a clip from another camera and unchecked it from the other camera since it only crashed when viewing Amcrest clips. After I unchecked it on the Axis camera, the Amcrest clips played fine.
Mike