Search results

  1. steve1225

    SMD

    you must enable this on NVR for specific channel and select that SMD is done/run on NVR not camera. Also you can't enable any other AI function on NVR (they exclude each other). This is low line NVR so can be other limitations...
  2. steve1225

    Hikvision dual sensor ANPR

    there were thread about those models: https://ipcamtalk.com/threads/dahua-have-varifocal-20-80mm-8mpx-with-1-1-2-sensor.77821/
  3. steve1225

    Hikvision dual sensor ANPR

    those without separate module are very old models... something like 5 years old... only first 4 models with separate module are new one...
  4. steve1225

    Hikvision dual sensor ANPR

    Poor sensor and lenses choices???? https://www.dahuasecurity.com/products/All-Products/Network-Cameras/WizMind-7-Series/Dual-Sight/IPC-MFW7849Y-Z4-T44 1/1.2" + 1/1.8"... both varifocal.. channel 2 is on module which can be tilted to channel 1... there is also variant with 1/1.2+ dual 180...
  5. steve1225

    5442 equivalent Dahua models in Australia

    yes, they are correct.. first if fixed lens, second varifocal 2.8-12mm
  6. steve1225

    Hikvision NVR 256-CH No enough network bandwidth

    ps. you should compare cost of VMS route (license / hardware / support) with cost of simply buying second 128ch/256ch NVR and dividing cams over two NVRs...
  7. steve1225

    Hikvision NVR 256-CH No enough network bandwidth

    if you heavy into hik central, you can download trial. https://www.hikvision.com/en/products/software/HikCentral-Professional-series/hikcentral-professional/ the same with other VMS (most companies offers downloadable trials). you can play, compare and select best for you..
  8. steve1225

    Hikvision NVR 256-CH No enough network bandwidth

    I don't think that you will find help about HikCentral Pro servers for 200cam install here on the forum. those solutions are not something you buy over internet using knowledge from some internet forum. You should find some local bigger CCTV integrator, which will show / demo you (and your...
  9. steve1225

    Hikvision NVR 256-CH No enough network bandwidth

    NVRs are very underpowered devices (comparing to modern intel/AMD servers), based on ARM integrated processors (SOCs) developed for mobile world.. Those 'channel maxed' NVRs are more for situation when someone will need to add a few more cams over half limit of lower model and not fills them up...
  10. steve1225

    Hikvision NVR 256-CH No enough network bandwidth

    so 0.5 mbit is for second stream.. FPS don't matter for NVR network bandwidth limit... but higher FPS with the same low bitrate decreases video quality (more video frames must fit into the same bandwidth)... ps. man, those bandwidth informations are BASICS... I don't know what type of...
  11. steve1225

    Hikvision NVR 256-CH No enough network bandwidth

    this is simple math: max_bitrate = 768 / max_number_of_used_channels.. where max_bitrate will be the sum for main and sub channel in mbit/s...
  12. steve1225

    Hikvision NVR 256-CH No enough network bandwidth

    Max bitrate is 5120 kbit (5 mbit) on both.. plus there is sub stream (around 0.5 mbit?), which you didn't showed.. NVR can allocate 5 mbit/s (plus sub stream) for each cam.. and simply don't allow for more that 768 / (5 + 0.5) = around 140 cams...
  13. steve1225

    Broadcasting 16CH to TV

    you can use hik connect.. but I don't think it will work 24/7 without any problems... apps (mobile/desktop) from hik / Dahua are very bad... most stable 24/7 cam live view is what NVRs have over HDMI.. it simply works...
  14. steve1225

    Broadcasting 16CH to TV

    1. some android cctv apps on TV with android / google tv operating system (or any google tv dongle)... 2. the same on Apple TV... 3. HDBaseT transceivers which transfers HDMI signal (4K) from NVRs to TV over CAT6 cable (no switches between, direct cable).. 4. HDMI over fiber cable between NVRs...
  15. steve1225

    Need Axis NVR RTSP output url format

    remember that after rtsp: there are TWO slashes (like after http: or https:) forum software removes one of them..
  16. steve1225

    PTZ5A4M-25X Tracking issues - Dahua SD5A425GA-HNR

    one more time... ask Andy for help... Especially older / special (customs for specific customers) versions of firmware for it... they are available on internal Dahua servers...
  17. steve1225

    Preventing Animal Triggers on IPC_T541-ZE-S3 AI Cameras

    1. disable acupick 2. set (draw) minimal object size in IVS configuration bigger that animal... 3. use IVS learning database feature to teach camera what to ignore (require latest firmwares on camera/NVR)...
  18. steve1225

    Bug in IPC-Color4M-T firmware?

    ok... you have very extreme situation here.. But even here you can play with HLC.. or exposure compensation... and HDR on 3449 will compensate this much better that 5449.
  19. steve1225

    Bug in IPC-Color4M-T firmware?

    Simply don't use WDR / SSA.. On those WizColor cams they are not needed and they are degradation to new WizColor video processing (they disable it).
  20. steve1225

    Bug in IPC-Color4M-T firmware?

    I played with many WIzColor cams at different locations. They when used in 'normal' (not WDR or SSA) mode, are using totally new video processing algorithms, taken from mobile & sport camera world... Algorithm with always enabled full frame HDR, strong local gamma manipulation, LUT color...
  21. steve1225

    Low-light struggles / improving image quality.

    this is a video noise, result of low light, short exposure time, high ISO (analog gain on image sensor) and LOW noise reduction settings... Noise reduction (especially 3D NR) removes this a lot.. but it works only for static image... for moving objects it creates ghosts (results of 3D NR...
  22. steve1225

    PTZ5A4M-25X Tracking issues - Dahua SD5A425GA-HNR

    ps. try to disable AcuPick on those and configure IVS one more time...
  23. steve1225

    PTZ5A4M-25X Tracking issues - Dahua SD5A425GA-HNR

    if this PTZ model behave bad (we have here confirmation from many users), You should ask Andy to report this to Dahua... Also ask Andy to check for custom firmware version for this PTZ. SD5 is very popular line (something comparable to WizMind-S in fixed cams) - I'm 100% sure, there are many...
  24. steve1225

    Best indoor and outdoor cameras from Dahua ?

    you can use them everywhere, except places where you need strong optical zoom (due big distance - like from gate to building). For good camera with strong telephoto zoom, you need to choose 5442-Z4E (Dahua) / 54IR-Z4E (Andy shop) (2x-6x optical zoom comparing to mobiles).
  25. steve1225

    Best indoor and outdoor cameras from Dahua ?

    You must contact Andy by DM (@EMPIRETECANDY) he ships to all EU...
  26. steve1225

    Best indoor and outdoor cameras from Dahua ?

    TIOC 3449-PRO aka Color4M (not 4K!) in Andy shop... choose 3.6mm variant (2.8mm is very wide)..
  27. steve1225

    Hikvision NVR 256-CH No enough network bandwidth

    NVRs always are using both main and sub-stream. Recorded is only main stream, but sub-stream is for viewing and transmitting to client... You must always add bandwidth used by both..
  28. steve1225

    Hikvision NVR 256-CH No enough network bandwidth

    1. for that large installation You should use VMS not NVR. NVRs are too much underpowered.. 2. it's not how much network bandwith is used by camera. But how much bandwith is reported by camera as maximum which can send. Can you show what encoding settings (all for main/sub stream) you have on...
  29. steve1225

    Config using web browser in 2025

    only very old Dahua / HIK cameras are using NACL plugins for Firefox... newer are using webservice - some kind of web proxy server, run locally on Windows in background which converts Dahua video streams to format accepted by modern browsers in real time.. the only exception is IE - which...
  30. steve1225

    Low-light struggles / improving image quality.

    good picture... if you want more details, the only solutions are optically zoom-in more and put there more light (white or IR)...