Search results

Thank you

witch would be the best working update for my NVR higher than v3.015 and there are some improvements ?

POE not working found an solution see D4 on picture , camera connected too my external switch . Would be nice i am could hack NVR from 8 port channel to 16 port since VCA don't produce much traffic. Thank you so much for all your helps, if you are once at central america Guatemala let mi no...

whoslooking you was right it was the browser cache , now i can see camera standalone and all looks fine, so the mdt hack was ok. but problem with nvr still there. If i connect to POE nothing happens. I will wait now maybee one hour if its connect . The same was with non POE ports had to wait one...

now i get login but still the same then before update. After put in the password ,opens for one second and close down to login. The password are correct and i can see camera on SDAP

ok i did upgrade with 5.25 but how can i start the camera now ? dos not give login and not showing up at SADP UPGRADE : get login page now

i was getting network abnormal/or sometimes language mismatch also to beginning when i plugged in to NVR POE without changing anything on camera. NVR has static IP and DHCP disabled

yes i did , i used just one NAS folder but after finishing 1. camera i copied all temp files too an separate camera specific folder. then deleted all temp files at NAS folder and started with next camera. So now i have fore every camera seperate folder with safed temp files.

oh my god its not possible to load back the mtb original file. After hack and first login to camera and all looked fine i disabled my NAS to prepare the next camera for the hack. Now i can get on root but dosn t found the NAS where temp5 and temp6 are located.

Thanks ! ok my NVR dos not have Telnet anymore. If i understand correct i will copy back mtdblock 5&6 to get original. But was the MTD hack right for this camera types and version or should be difference? I like to now this. There are some different post with different solution for the same...

dos not found telnet, could it be thats disappeared on nvr with v.3.0.15? i am added it in manual. It looks like thats onvif isn't there to add camera. to clarify! was it correct to do mtd hack directly 2cd2032 v5.28 and 2cd2732F v5.25 or should be first flashed with your 5.16 and upgraded...

I am not sure anymore, i was thinking that , then i have 4 cbx region changed cameras at no poe port connected. Maybe could be that's with NVR 3.0.15 NVR checks only if POE ports connected cameras are the same languages How can i check it with Putty get not connected to NVR and cannot find...

ONVIF shows all cameras with 192.0.0.64 if i plug in separately i check t one camera prtHardInfo and got this ! looks ok?

after disconnecting from NVR only one camera let mi login to set default all parameter but still offline network abnormal at NVR. other 2 cameras is coming the login window after password opens the camera website just for seconds and close it down to login. After language update i am tested...

like this? IP: 192.0.0.64 User Name: admin Password: 12345 Port: 8000

ok my 3 cameras updated to language 1 and are working standalone. If i conect to NVR 7608NI-SE/P with 4 POE and 4 channel nothing happens, still offline network abnormal on POE ports. Password NVR and Camera the same 12345 Any hints please? If i disconnect camera from POE IP has changed to...

sorry my fold now shows the same checksumm

2 of my 3 cameras are correct changed to English. With the last one i have the problem if i change in line 650 04 to 01 and line 670 OA to 57 the checksume are changing. What can i do? The camera model its different 2CD2732F

first camera updated now has language 1 if i am check with prtHardInfo, but every time if i am login get this messages. and only on this updaded camera regardless if iam use firerfox chrome... After ok all setting at the camera inside looks normal live view..... just very slow and message web...

one more questions my temp6 looks different under 53 are 02 that's ok but under OE are 50 not 57 ? is that ok to go to 51?

Thanks i am getting crazy step by step for dummies but now i have the files in my folder

i created the User CAMERA did a shared Folder on my user Lobo and can see shared folder on both User. On the camera if i test it get error. something i did wrong

i do not understand putty ! After writing this on putty cat /dev/mtdblock5 > temp5 cat /dev/mtdblock6 > temp6 where can i found this saved file after????? Or do i have setup seperate directory? need some help to get the files from the camera to HxD i am not familiar with the strings...

should i get in with admin and password or root and password ? if i use root and password nothing happens and connection stops Mount cd /mnt/nfs00 To copy the mtd files cat /dev/mtdblock5 > temp5 cat /dev/mtdblock6 > temp6 Change the...

ok solved problem to get connected with putty was different description from old cbx email to open telnet at camera not ssh and port 23 has to be port 22 and SSH enabled , not important witch IP.

thanks i am downloaded from this side. needs the camera telnet activated or something else? needs my laptop 192.0.0.128 and 192.0.0.64 the camera to get in? camera has 192.168.10.178

Delete

if i use 3.07 or 3.08 NVR i don't have VCA on it. Without linecrossing the hole system are useless for me through 100 of false alarms dally. i will do the mtd hack. checking best download site for putty. only putty exe dos not connect to camera . telnet activated on camera Do you have an...

now the NVR logs like this i will check your mtd hack today .