Search results
-
F
DS-2CD2347G2-LU POE issue (Resistance too high)
Yes, both ends looks like they should This is pretty easy and a good idea. I will try this tomorrow. Unfortunately i dont own one. Perhaps you can link to a decent cable tester? Allready did this and it did not solve the problem. -
F
DS-2CD2347G2-LU POE issue (Resistance too high)
I have 4x DS-2CD2347G2-LU connected to a DS-7608NI-I2/8P. After the initial setup (4 weekes ago), they all worked fine, but a few days ago, one of them stopped working. When i check the NVR, the LEDS for this particular cam is not flashing like the rest. When i check POE status on the NVR, i see... -
F
Help troubleshoot night image quality
Hi I have a problem with the quality of the image when it's dark. I pressume its caused by some background lighting from a streetlight. You can see the problem in the screenshot. Also how it looks in daylight and my settings for that cam (default). I have marked where the streetlight is in the... -
F
DS-7604N-E1/4P wont boot up
Thanks alot for your effort so far, atleast i got the cams working :) But is there any way to get the NVR updated so i can use HikConnect?- fevis
- Post #10
- Forum: NVR's, DVR's & Computers
-
F
DS-7604N-E1/4P wont boot up
Hi again I managed to get it working again (with english menus) by installing old english firmware (3.0.10 build 141126). Got this from another thread of yours. Then i read i can update to 3.3.4 version and still maintaining english language, but i cant find this anywhere? Actually, the only...- fevis
- Post #8
- Forum: NVR's, DVR's & Computers
-
F
DS-7604N-E1/4P wont boot up
Two more questions. If i purchase a new NVR in my own country (Denmark), will they work if my cams are Chinese region? If not, can i then buy a new NVR from China with hacked firmware and this would work with my cams?- fevis
- Post #6
- Forum: NVR's, DVR's & Computers
-
F
DS-7604N-E1/4P wont boot up
Wow so i basically broke the NVR when i updated the firmware :( If i manage to update/rollback to the CN firmware i understand the menu will be in Chinese, but how about the software, if i connect to the NVR through iVMS? Will this be in english language? The cams are from same seller on Ali...- fevis
- Post #5
- Forum: NVR's, DVR's & Computers
-
F
DS-7604N-E1/4P wont boot up
Yes exactly. I updated the firmware couple of weeks ago. I guess my NVR is China region (purchased on AliExpress). Sounds like you are spot on... Is there any way to roll back the firmware update or update to correct China version? Hmm, im not sure. I did do the port forwarding back when i...- fevis
- Post #3
- Forum: NVR's, DVR's & Computers
-
F
DS-7604N-E1/4P wont boot up
Hi all Few days ago my NVR started playing that annoying "beep" sound. "Beep" repeated itself like 10 - 15 times and then the NVR restarted. Then the same thing happened again, rinse repeat. Thought it was my HDD failing, so went ahead and purchased a new one. Unfortunately same thing happens...- fevis
- Thread
- Replies: 16
- Forum: NVR's, DVR's & Computers
-
F
Event playback delay
Hi I remember when setting up my 4 cams (DS-2CD2332-I) and NVR i was able to set a delay for event playback. So if i started playback of event it would start 30 secs before event. I cant remember where i change this. Now it is 30 secs, but that is long to wait for seing some spiders etc. I want... -
F
Wrong screensize in IVMS-4200
Thanks alot. It seems that this DPI scaling was set to 125% on my laptop, i have no idea how this happened. This resulted in the issue with the screensize in iVMS not fitting the grid. I changed DPI scaling back to 100% and VOILA, everything ok now !! :) -
F
Wrong screensize in IVMS-4200
Yes those settings are allready at "Fullscreen". I just installed iVMS on different PC and here it works like it should, so it must be problem on the laptop / laptop settings. -
F
Wrong screensize in IVMS-4200
Hello I have a wierd problem in IVMS-4200. No matter what i set cam resolution to the image wont fit inside the grid. See these screenshots. 1 i 1cam size other is 4grid -
F
Mark events/motion on timeline when recording continuously (24/7)
I can see events like this if i am viewing directly from the NVR but was hoping this was also possible from the browser. Guess this is not possible then. Any other software that will let me do this? -
F
Mark events/motion on timeline when recording continuously (24/7)
Hello I have set my 4 cams up to record 24/7 to a Hikvision NVR. Is it not possible to mark events/motiondetection on the timeline when you do this? At the moment it only marks with blue, even tho motion detection is enabled. I am using default software that are installed on NVR. Same thing... -
F
DS-7604NI-E1 vs DS-7604NI-E1/4P
Thats a great idea keeping all the cables hidden away and only 1 cable to the NVR inside the house! You have any links to a external switch + non PoE NVR to a good price? -
F
DS-7604NI-E1 vs DS-7604NI-E1/4P
Yes sorry i meant upgrade to this one: DS-7608N-E2/8P -
F
DS-7604NI-E1 vs DS-7604NI-E1/4P
Thanks for taking your time to help me out. Cameras will be covering - driveway/front entrance - back house/entry - porch/entry - backgarden/entry Upgrade of the NVR you are right. I think it is good option to upgrade to this DS-7608N-E2/8P for only 50 usd more. As for the cameras i am not... -
F
DS-7604NI-E1 vs DS-7604NI-E1/4P
Thanks for the heads up about the high prices :) Does this setup looks ok to you? 4 x DS-2CD2332-I 1 x NVR -
F
DS-7604NI-E1 vs DS-7604NI-E1/4P
Hello As title says. What is the difference between these 2 models? Links: DS-7604NI-E1 and DS-7604NI-E1/4P Only difference i can tell is the price. First one about 60 usd cheaper. -
F
Need suggestion/advice for new system
Hello all Been reading in here for a while, since i am trying to figure out what system is best for me. Hope you are able to help me with my last questions, before i purchase :) I want a system for my home. Cameras are going to be placed outside, monitoring entrances to the house and driveway...