Search results

Installed A2000 into poweredge server with dual E5-2680v3. ALPR CUDA working. CPU mode worked too before I resolved CUDNN issues. (Used CUDA 12.3 + CUDNN 9. Path to CUDNN bin folder didn't work - duplicated cudnn64_9.dll into new cudnn64_8.dll + put all CUDNN files into C:\Program Files\NVIDIA...

Hmm, Interesting - the Nehalem CPU gen of both desktop + servers appears to be impacted. Ya. One test I tried was CP 2.1.8 , forget which ALPR version it defaulted to install. But it did start ALPR CPU and didn't crash. But no CUDA there either. Perhaps its due to newer versions of Paddle...

Ya quite familiar with the R710 GPU situation. If I remember correct even the PCIe risers will only give you 25W rather than standard 75W. So can't even use low power cards like 1650 or A2000. The Xeon 56xx in the R710 is actually same gen CPU as the i7 920 though. So very well may...

:-( Ya. Well there is a pattern here on this i7 920. I'm likely going to be installing this A2000 into its permanent server this coming weekend. Poweredge r730xd using dual Xeon E5-2680v3. ESXi7 , Server 2022 VM. My hunch is ALPR will probably work with these Xeons and this python / paddle /...

Thanks for confirming. Same same. Good luck. I've tried fresh CP install many times on CUDA 11.8 , 12.2, 12.3. Well that shows issue crossing Nvidia Turing + Ampere cards. Yet I have another Ampere 3050 running on Ryzen 5900x running ALPR CUDA just fine. What exact old CPU you using? My...

Thanks for sharing. So the same ALPR "failed to start" + Win App event log has this error? App Error - 1000 Faulting application name: python.exe, version: 3.9.6150.1013, time stamp: 0x60d9eb23 Faulting module name: common.dll, version: 0.0.0.0, time stamp: 0x6585a281 Exception code...

No. Sorry I tried to be short explaining goal of this new A2000 but perhaps I was confusing. The A2000 is actually going into a Poweredge Vmware server which presently has a GTX 1650 installed in it. This GTX 1650 is only doing BI stuff. Technically the A2000 is going to replace this GTX 1650...

No, misunderstanding - I have ALPR 3.0.2 working on an entirely separate CP deployment with different RTX 3050 8GB. This A2000 I'm testing on a bench is to replace it. I cannot get ALPR 3.0.3 / A2000 to not crash regardless of trying 3 different CUDA versions 11.8 , 12.2 , 12.3. And on all 3...

I see. Perhaps something that could be considered in future releases to have archive repos build into CP web UI for old modules. I'm sure much easier said than done though. Well I was going to explore the ALPR 2.9.1 to see if any different on A2000? If its a bunch of work for ya don't...

I've identified the modulesettings.json , this is a useful compatibility matrix. But its still not clear to me how to target older module versions within CP Web UI. Based on this matrix I should be able to be on CP 2.5.6 and install License Plate Reader 2.5.0-RC6 or newer. But how does one do...

Thanks for investigating. I'll inquire over at CP. I am however quite curious how one goes about specifying the module version to install. Is the CP version hard locking the available module versions? Or is there a xml / config can be edited? I'd like to try previous license plate reader...

Nothing within CP log even on trace level. Windows event log though: This is a fresh Win10 22H2 install. Basically nothing installed but CP, drivers, gpuz. It's an old i7 920 platform I had available. Just trying to test new A2000 + CP before installing A2000 it into a Poweredge Server.

Not sure if it means anything but despite selecting the do not use cache I do see:

Unfortunately this has been done numerous times with same result. Tried no download cache on both on previous cuda 12.2, cudnn 9 and on current cuda 11.8, cudnn 8.9 Edit: And CP was completely uninstalled + codeproject folder delete when switching cuda versions.

Really been recently struggling with ALPR module. Previous issue it was said GTX 1070 ti wouldn't be supported. Now I have another test system with RTX A2000 12GB and cannot get ALPR 3.03 to run period. CPU nor Cuda. Crashes after ~2 min on CPU. And I don't see any debug logs about why...

Missed this response. Not sure if you wanted some CP or BI screenshots so I did both.

Your PC there will no doubt be able to run BI+ codeproject together provided you don't have tons of cams or need for many UI3 streams. Just be selective small with codeproject models. This test system is my main workstation using 8700K @ 4.7. But its just for small 2 cam install and is...

Encountering ALPR 2.9.0 error during install. Any suggestions? (I also tried CUDA 11.8 prior to 12.2. Both ALPR only CPU.) ALPR installs with CPU only. Yolo v5 + Yolo v8 CUDA works. Win10 + GTX 1070ti 20:29:27:ALPR: CUDA Present...Yes (CUDA 12.2, cuDNN 8.9.7.29) 20:31:02:ALPR: ERROR...

Yup - the frame under static object analysis is bound to the current profile / schedule. Even though my Profile 2 day didn't have motion trigger enabled, it did have zone enabled and defined. Yesterday, editing static object analysis under profile 1 it was still using zone A defined in Profile...

Schedule switched to profile 1 but still didn't work. I then toggled static object completely off and saved. And then re-enabled and saved. Then went back into analysis configure and it refreshed. I also see the default countdown of 120s is actively counting down. Where before it wasn't...

Mentioning the "active zone" was bad move as the Profile 2 is used during the day and this camera doesn't do any daytime alerts. I'm editing all this under Profile 1 (Night) Tigger + Alerts/AI tabs. I would expect it to load the motion zone map from Profile 1 when editing Static analysis...

Finally getting around to exploring new static object analysis feature. Confused though. I use motion detect zone map - \Motion\1 . Areas not covered are masked hidden from frame. This is how I have dealt with false detection in past as areas are not processed by code project. On one camera...

Thanks. Reviewed json request suggested. Both under 100ms. Local LAN 9.41ms + VPN 48.44ms. (Calendar for default "All cameras" group) HOWEVER - Feel stupid now for not discovering by now that this issue is only happening on the default "All Cameras" group. We have 4 custom groups for staff...

Thanks for sharing. Well I emailed BI support about it Mid June and Antonio said to try repair/regenerate on DB. I then asked for more details about repair/regenerate function as I do not want to lose any alert to clip links / playback. And if BI DB is compatible with getting online backups...

Running Blue Iris for ~ 2.5 months. A month after go live I installed a BI update and the UI3 calendar red dots stopped appearing for days future days. However the BI server + BI remote management software show all red dots. UI3 = May 12th - June 14th have red dots. BI = May 12th - present have...

Hi. I finally got ours working decently. However its on our PTZs with smart tracking and zooming that really get the plate large and in focus. Hikvision intrusion detect sets off smart tracking + external trigger to BI + AI. These are the settings I found most relevant to get ALPR reading...

Just got ALPR deployed yesterday, I did have a fight with CUDNN proper install but finally got APLR - License Plate Reader 2.2 (Codeproject 2.1.6) working on CUDA 12.1 + CUDNN v8.9.0.131. RTX 3050 on external PC from Blue Iris. (Edit: I did have to copy cublas64_12.dll and rename...

Hi, Is there any special setting I'm overlooking to get a Hikvision NVR to move a ptz camera to the appropriate location / frame where a smart event was created. It does this when configured on Camera side. But on NVR side it will not move camera which makes config far more complicated in...

Finally - just got an email answer as to why capture schedule is unavailable. IVMS can get alarm pic but Hikvision NVR is incapable of producing alarm picture. A separate storage server with dedicated HDD partition is required. Storage sever being added to IVMS 4200 client to get alarm pic. I...