Search results

Not sure if they could or would help as probably not installed or purchased from them but Nelly's Security is now a UNV provider.

Never tried it I just type in the address, and it remembers.

I use the IE Tab plug-in and set it to IE 11 Standards Mode in options. No issues with Dahua or HK.

Ok, one more try. I want this out of my way and willing to loose a bit to hand it off. As I have no foreseeable use for this and would like to sell to someone on here instead of eBay or wherever. I won't go any lower then $300 as that is already less then half new from Andy.

Edit bump

Ok, sent an email and got in writing I can put up cams. I ordered one of the HK mini PTZ as I can't really mount the SD5A425XA-HNR and even if I could near the celling would really still be too low.

ATT Fiber so long Cox, was 1gb/35mbps now 2gb/2gb unlimited data.

Thanks, yea I had that one before my current one, then sold it to fund my new one. I guess the price came down on the HKs looking around they are $450-$500 depending on 2/4mp but would most likely do 2mp due to sensor size.

No assigned spaces and would like a PTZ but if not, I would just move the bullet/turret to the needed spot not great but if it works, I deal with it. No major issues yet around me but have had a few cats stolen off cars. I wouldn't care as much but this housing is mostly university kids the...

I already asked and was told as long as it's not on one's door to stock or track them it should be fine.

I just moved and would like a cam or two for watching my cars and one on my patio for Amzon or whatever deliveries. I currently have two HFW1831EP 8mp 2.8mm/4.0mm, two T5442TM-AS 4mp 2.8mm, and one SD5A425XA-HNR 4mp PTZ. I may use one of the turrets or bullets for the patio cam if there's not...

If all else fails and you don't mind paying like $10 I have used this site before and had no issues. Not sure where they got the tools or if they work for Dell but can unlock out of warranty machines. Master Password that Works 100% - Dell Bios Password Reset (pwd4bios.com) On the making sure no...

Agreed had Cox and was paying $150 for unlimited data and had 1gb/35mbps now with att fiber at 2gb/2gb. Thought about the new 5gb but 1gb is plenty and most servers/services can't max out 1gb and are capped. I do a lot of uploading to Google though and wanted the faster upload.

I don't know on the ends. I have never really messed with fiber only premade cables. Just now getting into it as I have 2gb full-duplex internet now. That kit looks to be a cleaver and a tester not a splicer there like 1k or so. So if you only need to do the ends it could work.

If just for one or two fibers, it would be cheaper and wiser to just buy a new premade cable. As the tools a fiber cleaver and fiber splicer machine and other tools if needed are not cheap or worth one-time use. Also depends on the where the break is. If nothing more, you would need a fiber...

If wanting the SD5A425XA-HNR I'm wanting to trade/sell mine if interested. WTT - WTS Looking trade my DH-SD5A425XA-HNR for a PTZ1A225-HNR-XA or smaller PTZ | IP Cam Talk

I have moved no longer have a use for my DH-SD5A425XA-HNR. I would take $300, I'll pay shipping but if you want insurance, it's $25 and I'll pay the difference as needed. Just 1 year old any bought from Andy.

Ok, though the adapter that came with mine says AC not DC. If DC I guess I got it right without a DIMM as so far no issues or drop outs. So, hopefully it’s fine and the NVR Poe wasn’t enough during certain movements.

Yep, I would say shutter speed and or needing more light/IR to support a faster speed. Mine still are not quite where I want them but good enough for 10' to 20'.

Well, wasn't paying attention the adaptor says AC output so shouldn't matter on the polarity technically unless it has a reversed polarity, but I don't know what hot/neutral. Anyways I'll just see what happens since it's not a DC adaptor. So far so good will watch it over the week and see if it...

NVR says around 25w a port and PTZ says 11w/20w with IR. So, it should work, though NVR is over 3 years old now so maybe struggling at times I don't have any fancy Fluke meters to test the ports. So, hopefully the adaptor will work if not I'll check with Andy and see what he thanks.

I don't know I haven't looked at the specs though it has been fine for around 9 months and just started. I have a DHI-NVR5216-16P-4KS2E. I looked to make sure maintenance/auto reboot or whatever it was is disabled. Though emergency maintenance not sure what that is, is enabled and if I try to...

I didn't look at the cam pigtail it does have a barrel connector, so I guess I'll get one off Amazon for the charger as I can't find one in the box. I thought the cam has separate wires for alarm/power etc...I haven't looked since I installed it. Wrong cam I have two in the same spot it does...

I can't find my instructions and the charger leads look the same and I don't have a DIMM it's at work. If I need the DIMM to check polarity I can next week. Though I was hoping to install this weekend. As my PTZ randomly reboots but is back in around 1-2 mins, I have changed ports on the NVR and...

I would if I could, but I pulled the 2.8mm and put the 4mm in its place. Not sure what LDC is will look it up never messed with it.

I have a PTZ as well already and has auto track. I just use that as an overall view and don't really care about anything past the first row of cars, and for that even the HFW1831E is fine for the most part.

I haven't seen this before and not sure the cause or what I need to change or look at. I may have caused it somehow going from my NVR to a POE for BI, though not sure how. I have no idea on that one could use NVR IP/Port and pass though streams. So I'll do that while I learn and try out BI and...

I knew there was a difference but didn't think it was this much. I like the 4mm better then the 2.8 while wider not much use on the left side or far back. I just need two 4mm and wouldn't need the PTZ.