Search results

Hello, I am trying to set up my dads laptop so he can view the cameras at cabin, The cameras are just IP Cam's that feed into a Dahua DVR so I don't use BI for recording just use it for remote viewing, They are not running on a Blue Iris computer that is left running all the time so I can't use...

Thanks for the info but it didn't work, The problem seems to be with ports for video, Not sure what Dahua wants to see on that, I know the 37777 and tried that on one cam but no dice, A friend has the same nvr with amcrest cams and it works good for him

I looked in Blue Iris and found what channels it was using for rtsp and copied that into the Dahua for 1 of the cameras now I can view the camera on the setup image page but it still wont transfer to the live screen, I also cannot name the cameras, see picture, anything i put in and click save...

I was using Edge but switched to IE and tried it in admin mode and it still won't show cameras, I can view all the cameras in IE by logging into them separately but I cannot get this thing to work, I did try it at home first where I have 2 other Chinese camera's and it worked great on them, I...

This is all I can get out of it, the list of camera's doesn't show up on the view live page.

They are the Chinese specials, the ptz bullet type from a few years ago, they have been pretty much flawless though, These do work good in blue iris, I hate to buy all new cameras at this point, until they fail anyway, I was hoping to get them to work with this nvr, I have a separate poe switch...

Hi everyone, I bought this Dahua NVR and I can't get it to play any of my camera's, It recognizes them on the add camera page and they all have a green dot next to them but they don't appear in the live view page so you can view them, all the Camera are onvif and I can access them through their...

They build some really cool stuff!

Hi Everyone, I am having some issues with a wired access point, Here it goes: My main router is in my house and is hooked to Fiber internet, I have 1 cat 5 cable that goes out to my garage and into a gigabyte POE switch, plugged into that switch I have 3 IP cams and a 4th cable runs out to my...

Thank You Vasycara! That tool fixed it, It set it back to original and all is normal again. For anyone else with this problem, Batch Control.exe is a tool that finds and fixes the firmware on your camera.

I assume you load that through the cameras upgrade page?

No luck with that either, I will have to try a complete reset when I go back up to the cabin, I was there today but wont get back till Friday, if anyone has any other ideas I would love to hear them, Thanks!

I cant get to the log in page, it just times out but I found that if I have IE open in the background and then double click on the camera in the SADP tool I get to the login page and can login and use the camera as normal, so once I was into the camera I reloaded the firmware but it is still the...

Hello, I was having some PTZ issues with my V1 Bullet so I did a "restore defaults" from the cam menu and ever since I cannot log into it with ie or firefox, I can log in with my IPhone, nothing seems to have changed there, works fine on phone, so I used SADP tool and it shows my original ip...

Yes they do, all of them are the same.

All good questions, As far as remote viewing, My apple products work well with no freezing, but they all use low amount of data compared to the PC, as far as viewing, Win 10, both IE10 and Firefox, The nvr is Dahua, and it is connected to dahua cams, The other cams have their own IP's and the...

I am pretty open on costs, I already got a lot invested in this stuff so I would like to see it work correctly, All Of my cameras are Ethernet wired so the wireless speed doesn't mean a whole lot but I assume that they go hand n hand with the higher speeds of the router? Do you think my current...

Hello, I am looking at upgrading my old WRT54G Linksys router, I have a issue that when remotely watching the IP cam it will freeze for about 1\2 a second every 7-10 seconds, I am not sure if the router causes this or my Internet Provider, I have 20Mbps up and down speeds and it is fiber to the...

You will need to forward the port 8002 in your router also, forward it to the ip of your camera.

You have to use the program called SADP to change that port number, changing it on the cam menu does nothing that could tell, it is default at 8000, I changed mine to 8001 and then changed it on my phone IVMS program to 8001 and all was good, the program comes with the camera on the disc.

Try change your line 4 on your router you have port 80 forwarded to ***.11 try change it to ***.13 to match what you have in your cam configuration for HTTP port.

This is the port setting box from the Hickvision camera, it has the settings for the server port on it that is used for the mobile viewing, our Huisun does not have that setting so I can only get port 8000 to work no matter where I set the port mapping settings, Is there any work around for this?

That's the thing, no where on the camera's web UI do I have it set to port 8000 but I have to use that on the router to get it to work on at least one of the cameras anyway.

I had the wrong picture in the last post, this is cam 2 settings,

Here is how the 2 cams are setup, I can view both on my pc with this setup, but only cam 1 on IVMS and I have to set the port setting on IVMS to port 8000 for it to work at all.

Hello Everyone, I have 2 Huisun bullet cams V-1 and I am trying to get both of them to work on IVMS 4500, I have one camera working on it but I need to forward port 8000 for it to work, I have the camera's RTSP port at 1025 and the second camera's port set at 1026 and have them both port...

Yes for now, I plan on adding more cameras and there is only so many available slots to allow port forwarding on the router, I will need to figure that out also, Thanks for your help!

Yes, I was able to set the port settings to different values in the "Port" settings and get it to work but I am wondering what the "Port Mapping" is for?

Thanks for your reply, I was able to switch the RTSP port and get it to work, But I do not understand the cameras 2 configuration settings are, the one named "Port" is where you can set the HTTP, RTSP and HTTPS port numbers, That I get but them there is the 2nd screen that is labeled "Port...

Hello, I have a question on the port settings on the mini bullet V1, I have a EyeSurv NVR that is configured and running and I can remote view it fine, I added the Huisun camera and I don't want it running through the NVR so I just plugged it into the router so I can access it remotely mainly...