Search results

Does anyone have an AcuPick enabled NVR & Camera that can provide some unbiased feedback on just how useful this AI feature actually is and if they feel it was worth the upgrade? Specifically I am wondering how well the accuracy is and if it requires face-level cameras to accurately work or...

Is anyone else having problems with the 3D Positioning feature in Blue Iris? Any recommended troubleshooting steps to try? I have the SD5A425XA-HNR from Andy @ EmpireTech and everything works great, when I am using the NVR I can drag a red box around the POI and it will center in on that box...

My old i7-6700 finally started to crap out after 7 years of running 24/7 so after some research I decided to get the Intel NUC 12 Enthusiast Edition from B&H Photo & Video which has the i7-12700H and threw in 64GB Ram along with a Gen4 NVMe all for around 2K shipped overnight. It's...

I have FTP backups configured in BI Settings to my NAS and have a base folder set as "/BlueIris/Stored/" which passes the test successfully. Now when I go to Clips & Archiving and set up the New folder to queue for backup, do I need to enter "/BlueIris/Stored/" again or would that resort in...

Currently, have BI + DeepStack running and for the most part, it works great but it's annoying when a family member walks outside to take the trash out thus walking by 6 different cameras and setting the alerts off like crazy. I'd like to receive alerts only when an unknown face is detected but...

I have the NVR5432-16P-I that I bought from Andy with 16 cameras like the IPC-T5442TM-AS and SD5A425XA-HNR along with some older ONVIF cameras. I am trying to enable SMB for one of my older cameras (IP-5IR4002VFZ-W) and I can see its properly detecting motion with the yellow box around the...

Hey guys I recently switched from a 16 Camera Blue Iris setup to the Dahua NVR5432-16P-I from Andy and I'm trying to set it to record motion/alarm/IVS events only but with "General" selected in the recording schedule it records every 24x7 and if I turn that off leaving MD&Alarm+IVS it appears...

The latest update 5.3.1.0 caused all 16 of my cameras to suddenly say RTSP not authorized however reverting back to 5.3.0.3 immediately fixed everything. I'm 100% positive the user/pass was correct and streams were available both internally and externally as expected and absolutely no settings...

Are there any noticeable improvements to motion detection when pairing a smart AI NVR with a smart AI camera? For example, currently looking at the NVR5432-16P-I ($1,050) with the IPC-T5442TM-AS ($155 each) camera and SD5A425XA-HNR auto-tracking ptz ($690 each) in hopes that spending more...

I see in the wiki and several other spots that Intel QuickSync is the best hardware decoder to reduce CPU usage on larger setups. I'm running BI on an i7-6900K which doesn't support QuickSync however I have a GTX 1070 video card on the machine so I was wondering if there were any benefits to...

I currently have a 16 4mp IP POE camera system running through an NVR from Enssecurity.com (Model # ED9632H5NV-16P), two of them are 20x PTZ cameras. Everything works great except I have about 50 palm trees that extensively cover the property and cause extreme shading issues and false alerts...

Hey Guys, I have a 16 camera system running through an NVR from Enssecurity.com (Model # ED9632H5NV-16P) and I have everything working with BlueIris for the past year or so just fine but can never figure out how to get the PTZ commands to work so that I can control my two PTZ devices through...

Hey guys for the past 6+ months I'm unable to view my UI3 through Chrome but works just fine on Safari or Firefox. Tested this on 3 different computers, all do the exact same thing. Is there something in Chrome causing this? It just sits there trying to load the page for 30+ min, never gives...

Hey guys, avid Blue Iris user here for the past 2 years or so. Currently running the latest update (5.0.5.8 x64) and suddenly I notice that the live view for all cameras (I have 17 IP cameras) is suddenly freezing after about 1 second. If i go to a specific camera, the picture updates then it...

I know this has been mentioned a few times already but wanted to push the notion a bit harder. Ability to auto-delete saved alert clips after XX minutes if Sentry determines its a false alert and to surprise it. In my case, Sentry blocks 95% of my motion alerts (400+ Daily) since their trees...

Anyone else seeing a bunch of timeouts yesterday and today?

Small observation I've noticed is that if you have your pre-trigger buffer set high (I had mine at 5 seconds) that when it sends the alert to Sentry for processing it seems to send some of the first frames in the alert which could very likely be nothing if the subject is out of frame during the...

Hey Guys, been an avid Blue Iris user for about 7 months now and for the most part everything has been smooth after the initial setup and learning curve. I have a pretty beefy gaming PC where I run BlueIris on and over the past 7 months noticed CPU usage and Memory usage "seemed" to be slowly...

Hey Guys, I have 16 cameras on BlueIris running the latest edition. My property is surrounded by 50 palm trees making it an absolute nightmare on windy days. I setup zone crossing, increased my delays and lowered my sensitivity but I'm still getting flooded with false alerts because my palm...

Each sunrise and sunset my cameras motion alarms trigger like crazy when the IR lights for my camera turn on and off. When you have 16 cameras it can get a bit wild and annoying especially when your cameras cycle the IR on and off several times when the light is just enough for IR off or ON and...

I just paid to have a local company install 16 new cameras in my home, all 4mp IP cameras and 2 PTZ cameras. They appear to be no-namer Chinese brands and upon lookup on a MAC for the IP and cameras I see their TVT Digital Technology brand NVR & Cameras. Half the reason for paying 7K for all...