Search results

Installed 5.7.0.4 and 2.0.8. Seems to be working. And also can select the size of the detection now. But this new combo spikes to 100% CPU quite a bit now. Not good. Had to change from medium to small.

Thanks, I did do a clean CPAI install for 2.0.7 because it didn’t work at all with BI initially. I haven’t gone to 2.0.8 yet. Will try today hopefully.

I upgraded to 5.7.0.3 and the sensitivity of the object detection is still not showing the low, medium, or high options in the drop down.

Hi, just updated to 2.0.7 and BI 5.7.0.2. In the AI settings for Default Object Detection, the drop down for complexity/sensitivity is blank. I used to have it set to "Medium". Anyone know if this is the expected behavior now? When updating CPAI, I shut down BI, uninstalled the old CPAI first...

on WAN, my app is set to connect directly to my home IP which will port forward. Nothing has changed but seems overnight, this slow to connect issue began. Once connected, it’s slow to load thumbnails in the app. Clicking various thumbnails or live views also take time to establish and once...

It doesn’t make sense since the app is supposed to be connecting directly to the server whether it’s WAN or LAN. But LAN is much faster right now while WAN sometimes just drops. And when I connect via VPN to the LAN, it’s as if I’m on the LAN itself and fast agaiin. Doesn’t make sense

but does anyone know why it seems to be so slow all of a sudden through WAN?

I noticed this this morning with the iOS app. When connecting over LAN, it’s super fast. When connecting over WAN, it’s super slow or not connecting at all. Rebooted the server, updated to the latest version of BI5, etc. Nothing. if I’m off the LAN, but VPN in back to the LAN, it’s also...

Running 5.6.3.1. For the past few updates been getting these too. Can’t be certain if it’s actually dropping the notifications on my phone though. “iOS push failure 80090308; check security exemptions and service Login”

Hmm. Very interesting. I could have hubitat open or close some kind of relay. How do I link that to the BI server though?

Thanks. Unfortunately, I don't. Thinking of using hubitat but seems overkill over just having a background tool to do it. I might look into it though.

Hi, Is there a way to monitor gmail Alarm.com notifications and change the BI profile based on the arming status?

Thanks! I can do that. But now set the profile back to Day/Night and it goes back to Auto for me. I can’t have the Day/Night profile and have both day and night be Color with different backlight and exposure settings.

Thanks! I’ll try to mess around with it more but I distinctly remember that if I set to the Full Time profile, go back to Night in the drop down, change to Color, then go back to change the profile to Day/Night, then go back to Night in the drop down, the drop down is grayed out and the setting...

This is an amazing idea. Is there a risk to having the username and password sent in clear text like that? Someone snooping the network or something? I suppose if there is a VLAN or separate network it might be okay?

interesting. I may have to look into this day/night utility. when using the day/night profile, it seems like the night portion can’t be forced to use color. I’m on the 7/29/2021 firmware from EmpireTech. really don’t want to go through and change the schedule unfortunately. I might look into...

i would like to see if there is a way to have the following: Day/Night Profile Day: settings for plenty of light Night: Stay in color, Different WDR or backlight control, different exposure compensation, etc When trying to use the day/night profile, it seems the profile day/night is basically...

Hi, any updates on the nighttime detail between the G1 and G2? I too noticed the level of detail and also shadow detail is a fair bit lower on the G2 night time image from the original post. Does the G1 also have the ability to start at a lower LED level and increase with a trigger?

Hi, When using the Sentry AI image analysis, the gif notifications seem to completely miss the original trigger. It’s like it doesn’t capture the info for the gif until after Sentry returns the signal to send a trigger instead of using the original cached trigger video. So for my front door for...

Hi, but this seems to only work to "copy" profile 1's settings. But what if I like my profile 2 and want to paste it to profile 1?

Awesome! Rich notifications -> 10-image gif.

Hi, I saw there was an update to support push notifications with gifs for iOS. I don't seem to get those. I only get a thumbnail image. Is there some setting or something I need to make sure is on to get these? I also get an email with a couple images and a short clip but it would be nice to...

This is my exact issue with i7-7700. Intel 630. So far, I have been using BlueIris Tools to reset BlueIris if CPU usage goes over 90%. Not ideal. I have also tried disabling hardware acceleration which puts CPU at 50% and GPU at 0% (with hardware acceleration BI starts at 17% while CPU is...

So it's been 14 hours since I rebooted the machine and it was about 88% CPU and 4.7GB RAM usage via the iOS app, up from 16% and 3.4GB usage on boot. (16GB physical RAM). So I logged in locally to the computer. Luckily I was able to find BI Tools on here and set it to restart BI when CPU...

The memory after a day goes from 3.5 GB or so to 3.8GB since last night when I restarted it. The CPU usage went from 18-20% to 45-50%. GPU usage looks about the same between 32-36%. This is via the task manager. If they are related, why does the CPU usage go up as memory usage goes up? I...

Thanks Fender, I searched it but my issue is CPU usage increasing, not memory.

Hi, I was able to get my system to 14-17% consistently but the past day or two I've noticed it is 50-60% with 25-30% GPU (task manager says video decode). RAM usages used to be 3.2GB now its 4-4.1GB. I haven't changed anything and can't figure out why it's doing this. I even turned the...

Hi, is there a way for Blue Iris to receive inputs from IFTTT or Stringify so I can change profiles based on other home automations events? For example, I can have Stringify monitor new emails sorted by label in gmail. Because of this, I could have my Alarm.com send an email notification when...

Following. I love the idea of smarter recognition but would ideally like for it to be done locally.