Search results

Here is a configuration: I have: - NVR DS-7608NI-I2/8P (with Audio in/audio out) with Full Screen Monitiring enabled when motion is detected. So a screen connected to NVR via VGA or HDMI displays a Live picture in a full screen when motion is detected on one of cameras. - 3 Hikvision dome Smart...

I had 2 cameras plugged in to first two poe ports and I've SSH-ed to NVR and ran netstat -an 192.168.254.2 and 192.168.254.3 were in that list. So at least nvr sees that poe devices are connected. But it looks like there are issues with furter data flows

No, i've tried 3 different rohters. Besides that it worked for the first time with router#1, but then it didn't neither on router #1, #2, #3. I've also tried to change camera port from 80(default) to 90 and to 8080

I've tried that - NVR could't see the camera connector through poe injector to the router. However when I've connected that camera through wifi to the same wifi- router and provided a power using POE injector, NVR displayed it in the list as active. Please refer to a screenshot. Very similar...

I don't have a PoE switch to try that. I have only poe injector 12v dc for 1 port

Your suggestions were good ones, thanks!

Password is correct, i can see a stream from the camera when I connect it to PoE injector and a router. Hikvision guidlines show exaples with acceptable passwords and tgey have abc..123..in the examples

Same damn thing with 3ft cable

When i've tried long distance PoE it stopped detecting ptetty quickly comparing to keep detecting on short distance poe mode. No, sadp still can't sere cams on long distance/short distance with laptop (static 192.168.254.100) plugged in to poe port

I've tried that about 10 times. I've tried with and without nvr reboot. I've tried all poe ports

Same cables work through poe injector and have been working on the same nvr during the the first try

Cables are good and work great between router and PC

I've tried both short (1meter), medium lenght cables - same story. Same cables were working fine for the first time. I've upgraded to 3.4.92 snd tried both short distance and long distance modes. The power comes in on PoE ports if you see the screen.

Cameras getting power, small camera gets ~3Watts and large one ~5.1Watts. The LAN lights (grèen and yellow leds) on PoE ports and cameras are ON and blink from time to time rarelly Yes, injector gives 12v DC for PoE I don't have power supply 12v DC at this moment. It's something with data on...

I've tried that, it shows connecting for a short time and then a warning sign with comment Risky password. But I've set strong password (abcd1234-) on nvr and cameras

I got Hikvision DS-7608NI-I2/8P NVR w/ POE running on the latest firmware, 1x DS-2CD2442FWD-IW(PoE 802.3af) and 3x DS-2CD4135FWD-IZ(PoE 802.3af) on the latest firmware. First time doing test I put everything together and managed to have all cameras working through NVR PoE ports. Then left it to...